In modern industrial production, the crusher is a very important piece of equipment used to crush and crush solid materials. In the working process of the crusher, the reducer plays a vital role. Among them, ZSY200-56-2 and ZSY224-40-2 hard tooth surface gear reducers are common reducer models. This article will introduce crusher selection and precautions in detail to help you better understand and select reducer equipment.
First of all, let's talk about the selection of crushers. When choosing a crusher, the first thing to consider is the characteristics of the material and the processing capacity. Different kinds of crushers are suitable for different materials, such as limestone, coal, metal ore, etc. In addition, the particle size and throughput requirements of the material need to be considered. Generally speaking, the processing capacity of the crusher is related to the width of its outlet and the size of the feed port, so it needs to be selected according to the actual needs when purchasing.
In the selection of reducer, the main thing that needs to be considered is the load characteristics and transmission ratio. Load characteristics include motion characteristics and load characteristics. In the working process of the crusher, due to the particularity of the material, a large shock and vibration load will be generated, and the load may also have a sudden change, so it is necessary to choose a reducer with shock and vibration resistance. The transmission ratio affects the discharge particle size and output of the crusher. Generally speaking, reducers with larger transmission ratios are suitable for fine crushing and high output, while reducers with smaller transmission ratios are suitable for coarse crushing and low output.
Next, let's introduce the ZSY200-56-2 and ZSY224-40-2 hard tooth surface gear reducers. These two types of reducers belong to the hard tooth surface gear reducer series, which have the advantages of simple structure, practical and reliable, and high transmission efficiency. Among them, the transmission ratio of ZSY200-56-2 reducer is 56, which is suitable for the general working conditions of the crusher. The transmission ratio of ZSY224-40-2 reducer is 40, which is suitable for special working conditions that require a smaller transmission ratio. Both types of reducers have high load capacity and high transmission efficiency, which are suitable for the transmission system of various crushers.
When using the reducer, you also need to pay attention to the following points. First of all, the lubricating oil of the reducer should be checked regularly, and replenished and replaced as required. Lubricating oil can not only reduce friction and lower temperature, but also keep the gearbox running normally. Secondly, it is necessary to keep the reducer clean and dry. Dust and moisture can have a bad effect on the reducer, so it is necessary to clean and protect the reducer regularly. In addition, it is also necessary to pay attention to the operating temperature of the reducer to avoid exceeding the specified range. Excessive temperature will cause the lubricating oil to degrade, and the life of the gear unit will also be affected.
To sum up, crusher selection and reducer selection are very important links in the selection of crusher equipment. When selecting a reducer, it is necessary to consider factors such as the characteristics of the material, the processing capacity, the load characteristics and the transmission ratio. The ZSY200-56-2 and ZSY224-40-2 hard tooth surface gear reducers, as common reducer models, have good transmission performance and reliability. When using the reducer, you should also pay attention to care and maintenance, check the lubricating oil and clean the reducer regularly to ensure the normal operation of the equipment. Through reasonable selection and correct use methods, the working efficiency and service life of the crusher can be improved. Hard tooth surface reducer