Recently, I have received feedback from some users, come to turn on the computer in the morning, the indicator light of the host has been flashing yellow, and the monitor does not have any screen display, what should I do if I encounter this problem?
This problem occurs very frequently, generally in winter, and the problem is usually caused by static electricity, or it can be caused by multiple memory module compatibility issues.
Therefore, we can try to clean the memory module first. Force shut down the computer host, unplug the host power, open the case cover, and pull out all the memory modules, the interface of the memory module is designed to prevent misinsertion, do not worry about the installation or reverse installation error.
After the memory module is pulled out, take an alcohol wipe paper, or an alcohol cotton to wipe the gold finger part of the memory module, if there is no alcohol wiping condition, you can simply wipe it with your hand many times, or wipe it with an eraser. At the same time, you can also clean the other places on the front and back of the memory module to eliminate the influence of dust and static electricity as much as possible.
Then insert all the memory modules into the host, test the boot, under normal circumstances, if there is no problem with the compatibility of the memory modules, then the host will automatically post detection, after the detection is passed, the indicator light will flash white, and then boot normally.
If the indicator light is still flashing yellow, you can plug the memory modules into the host one by one and turn them on to test which memory module has compatibility problems, or which memory module has hardware faults, and you can troubleshoot this memory module.
Small problems, accumulate big experience, share with friends in need, welcome everyone to communicate with each other!