There may be a lot of people who don't know much about the prefabricated wall sub-warehouse joint model, here is a collation of the relevant content about it, if necessary, you can collect it.
Split joint is a construction material specially designed for floor protection.
The in-depth analysis of the prefabricated wall chamber joint model involves the description of its concept, design and installation.
to understand the concept of a sub-bin seam. Warehouse joint refers to a protective measure set up in order to avoid the floor being affected by wall deformation in the construction process of prefabricated wall. Due to the large external force of the prefabricated wall in the process of centralized hoisting and installation, if the sub-warehouse joint is not set, the deformation of the wall will be directly transmitted to the floor, resulting in floor damage. The function of the silo joint is to absorb the stress caused by the deformation of the wall during the construction of the wall, so as to protect the floor from damage.
Let's take a look at the design principles of the split seam. There are several key factors to consider in the design of a sub-bin seam. The first is the width and depth of the bin seam. Generally speaking, the width of the sub-bin joint should be determined according to the deformation of the wall, generally between 20mm and 50mm. The depth of the sub-chamber joint should be determined according to the thickness, material and use requirements of the floor, generally 1 4 to 1 3 of the thickness of the floor. In addition, the spacing of the sub-bin joints also needs to be reasonably designed, generally 1 5 to 1 4 of the wall height.
Let's learn how to install the sub-bin joint. The installation of the silo joint needs to be carried out in the wall construction process, and the specific steps are as follows: in the wall construction process, according to the design requirements of the silo joint, the slotting is carried out at the appropriate position. The depth of the grooving should be consistent with the design requirements of the sub-silo joint. Then, the material of the sub-silo joint is filled into the groove according to the specified width and depth, and it is tightly fixed. Carry out the construction of the floor to ensure that the floor is tightly attached to the sub-warehouse joint.
Prefabricated wall sub-chamber joint is a construction material designed for floor protection. In the design and installation process, factors such as the width, depth and spacing of the sub-silo joints should be considered to ensure that the floor is effectively protected during the construction of the wall. The design and installation of sub-silo joints is an important part of floor construction, and it is necessary to operate in strict accordance with the requirements to ensure the construction quality and service life.