1. Introduction to the strand clip:
Steel wire clamps are also called wire rope clips and steel wire clamps, which are called differently but have the same function. The steel wire clamp is a clamp used to lock the wire rope, which plays the role of fixing the steel wire, connecting and protecting. In the construction of power grids, although the size of the steel wire clamp is small, it can play a big role. Usually the models are divided into: JK-1, JK-2, JK-3.
2. Preparations
1.Choose the right wire rope buckle: Select the corresponding wire rope buckle according to the diameter and structure of the wire rope. Generally speaking, the larger the diameter of the wire rope, the larger the wire rope buckle required.
2.Check the wire rope buckle: Before installation, check the wire rope buckle for damage, deformation, cracks and other defects, if so, it should be replaced.
3.Check the wire rope: check whether the wire rope has defects such as broken wire, wear, deformation, etc., and if so, it should be replaced.
4.Prepare tools: Installing wire rope buckles requires tools such as wrenches, screwdrivers, and hammers.
3. Installation steps
1.Thread the wire rope through the wire rope buckle: Thread the wire rope through the two holes of the wire rope buckle to make it bite with the wire rope buckle, and note that the direction of the wire rope should be consistent with the direction of the wire rope buckle.
2.Adjust the position of the wire rope: put the wire rope buckle and the wire rope on the plane, and tap the wire rope buckle with a hammer to make the contact surface of the wire rope and the wire rope buckle fit tightly.
3.Tighten the screws: Use a wrench or screwdriver to tighten the screws on the wire rope buckle to make it tighten the wire rope.
4.Check the installation quality: After the installation is completed, check whether the connection between the wire rope buckle and the wire rope is firm, and whether the wire rope is loose or deformed.
5.Repeat the above steps: If you need to connect multiple wire ropes, you need to repeat the above steps until all the wire ropes are connected.
Fourth, summary. The steel wire clamp is a clamp used to lock the wire rope, which plays the role of fixing the steel wire, connecting and protecting. In the construction of power grids, although the size of the steel wire clamp is small, it can play a big role. Therefore, when we choose this product, we should clearly understand the performance and characteristics of the product, so as to better enable our application, well, I hope this article can help the user, thank you for your support.