The high scrap rate of wave soldering equipment can be related to dirt, oxides, or other impurities on the surface of the equipment. Cleaning with dry ice is an efficient and environmentally friendly method that can help remove dirt from the surface of the equipment. Here are some steps, along with some key considerations:
Learn about device requirements:Before you start cleaning, make sure you understand the cleaning requirements and limitations of your equipment. Some equipment may be more sensitive to the cleaning process and require special handling.
Prepare dry ice cleaning equipment:Get professional dry ice cleaning equipment, including dry ice cleaning machines, spray guns, and more. Ensure that the equipment meets safety standards and that operators are trained.
Check device status:Check the condition of the equipment before cleaning to ensure that there are no loose parts to prevent additional damage during the cleaning process.
Protective measures:Ensure that appropriate precautions are taken during the cleaning process, including the wearing of personal protective equipment, to ensure the safety of operators.
Wash with dry ice:Dry ice pellets are sprayed on the surface of the equipment, which are able to cool quickly and brittle the dirt that adheres to the equipment. Then, use an airflow to blow the dirt away from the surface of the device.
Check the cleaning effect:After cleaning, carefully inspect the surface of the device to ensure that all dirt and impurities have been removed. If necessary, a second cleaning can be carried out.
Dry ice cleaning machine is suitable for 13 major industry fields.
When performing the cleaning process, ensure that all relevant safety and environmental regulations are followed. If you are not familiar with dry ice cleaning technology, it is recommended to ask a professional cleaning service company to help.