Work with ease Choose an office chair that reclines for a lunch break to make your work more comfort

Mondo Workplace Updated on 2024-01-28

With more and more time working on the computer during this time, the existing chair seems to be not very suitable, so through the comparison of several platforms, I started an ergonomic chair to alleviate the discomfort of sitting for a long time, and I can also use it to lie down and sleep during the lunch break, which has been used for several days, and I will share it with you.

This time I bought a GF88 ergonomic chair from Godley, and I opted for the black version with retractable feet. Unpack and install in the yard immediately after arrival. The first thing to say is that the parts are in the box, placed in a staggered and uniform manner, each part is covered with a bubble bag to protect, there are several pages of detailed installation instructions, and the screws equipped to fix the chair parts, all have instructions for the location of use, as well as the hexagon key used for installation, which is indeed very attentive. And the merchant promises that the warranty time of the chair is up to 10 years, and if there is a problem with the accessories within 10 years, it will only be replaced without repair.

All the accessories are taken out, but also a family photo, the accessories are not much, the chair legs, the seat body, the headrest, is roughly the components, so the installation is not complicated at all, according to the manual, it will be assembled in about 10 minutes, very simple, even if it is a girl, it can be easily assembled.

The lifting air pressure rod and the explosion-proof base part may also be a component that everyone ignores when buying an ergonomic chair. The Godley GF88 uses a 3-level safety air pressure lever, which is SGS certified and has a 2 under the seatThe 5mm thick explosion-proof chassis is in case of safety problems caused by the lifting rod, and this ergonomic chair is willing to spend effort to do a good job in this invisible part in this regard.

As an engineering chair, in fact, the most important thing is to form enough support for the lumbar spine and cervical spine of the human body when used for a long time, so as to protect the health of the lumbar spine in use, and also allow the user to reduce the pressure on the body when sitting for a long time and not be too tired. Godley's GF88, in terms of lumbar support, uses a separate innovative 4D lumbar support, which can form an opposing support for the waist, when working, when leaning forward, it can also support the waist, when sitting, the lumbar support can be very fitting, in line with the human body curve, when lying back, the waist should be supported enough, such a design, no matter what kind of use scenario, can make the use of relief.

Then there is the lying part, buy this engineering chair, in fact, the most important part, is also because GF88 is a chair that can lie down and rest, 152 degrees of lying flat angle, enough to use in the office is inconvenient, you can also lie down and rest, and it should be the design of the center of gravity has been examined, so when the maximum angle is flattened chair, 150 pounds of people lie up, or very stable, by the way, the headrest, measured, about 35 cm or more width, when lying down, even the pillow is not needed。 In addition, while the backrest of the chair is adjusted at the same time, the armrests can also be linked with the linkage, ensuring that the position of letting go can be maintained in a very comfortable state under any angle.

Finally, the material of the chair, the cushion part, is made of a good surface material with high elasticity, which is generally soft, combined with ergonomics, using a saddle shape, which is not easy to collapse after sitting for a long time, and also avoids the chance of sitting for a long time and numbness in the feet. The one-piece plastic back is made of interwoven mesh material, which has good elasticity, ventilation and is also very comfortable.

Overall, the price of the early 600s is a 10-year ergonomic chair with an independent all-round lumbar support, which can be sat or reclined, and the cost performance is very high, and it is more comfortable and stress-free in front of sedentary work!

Related Pages