Rubber-type conformal coatingIt is a fast-curing coating material that provides outstanding moisture resistance and environmental protection for printed circuit boards, and synthetic rubber conformal coating is a special polymer, so it has outstanding low moisture absorption and temperature resistance, forming a tough and wear-resistant surface coating after curing. It can withstand electrolyte water droplets for at least 48 hours, and there is no abnormality on the surface of the PCB circuit board paint film.
Enhance the moisture and dirt resistance of electronic circuits and components and prevent solder joints and conductors from being erodedIt plays the role of shielding and eliminating electromagnetic interference and preventing short circuit of the line, and improves the insulation performance of the circuit boardBeneficial for abrasion and solvent resistance of circuits and components;It can withstand mechanical vibration and oscillation, thermal shock, and operation at high temperaturesLow odor and reworkable;Protect the circuit board from various chemicals, salt spray, moisture, electrical insulation, dust, vibration, high and low temperature and other harsh environmental impacts.
It is typically used in the insulation, moisture-proof and protection of PCB circuit boards, and can also be used for the protection enhancement of various devices and integrated circuit boards, protecting circuit boards and their related equipment from the erosion of the bad environment, and is widely used in household appliances, electrical appliances, electronic toys, automotive electronics, new energy and other industry products.
Before use, the coated product needs to be kept clean, and the general contaminants are moisture, dust, oil, etc.;It is recommended to use it in a measured manner, and try not to pour it back into the original packaging if it is not used up to prevent contamination;If you find a slight crust on the surface, remove the epidermis and continue to use itDue to the fast curing of rubber conformal coating, the flow rate should be checked regularly when soakedIt is recommended to wash immediately after use, and replace the uncleaned ones to prevent contamination of rubber or brushed floc.