The PowerView PV101 display is a versatile tool that enables equipment operators to view standard engine and transmission parameters as well as activate stored faults**. The display can display single or four parameters at the same time, with a text description of the most common fault conditions. The enhanced alarm has an ultra-bright alarm and shutdown LED.
All models Tier 3 Euro Stage III and earlier (PV101-A) and Tier 4 Euro Stage-IV (PV101-C-T4) have the following features: Multiple language options - English, Spanish, German, Italian, French, Brazilian Portuguese, Chinese, Japanese, Czech, and Russian. Sender Input chooses between a backlight dimming function or a fuel level. Can be calibrated to use a non-murphy fuel transmitter. Service Reminders - Five service reminders allow users to set times: changing engine oil, air filter, hydraulic oil, and servicing the engine and servicing the machine. Select Source Address Select the exact address that PV101 will declare on the bus. Ability to select CAN bus data rate. More than 50 standard SAE J1939 parameters are displayed. Displays troubleshooting instructions for supported parameters.
Additional features of the Tier 4 Euro Stage IV (PV101-C-T4) model include: The menu offers auto-regeneration, request regeneration, and prohibit regeneration. Visible icons indicate: Active Regeneration Diesel Exhaust Level (DEF) Diesel Particulate Filter (DPF) Limited Suppressed Regeneration or High Exhaust Temperature Post-Treatment Failure OEM Menu Password protected menus provide modbus settings, engine speed control on/off, DEF regeneration menu on/off, SCR EnableDisable, and other key menu items that require restricted access. TSC1 (Torque Speed Control) allows the user to set the operating speed via CAN if supported by the engine manufacturer. The extra 4-up screen allows the user to switch between two 4-up screens. The second user-configurable screen displays Tier 4 parameters by default: DEF level (diesel exhaust oil level), DPF active regeneration status, exhaust filter outlet temperature, and exhaust filter inlet temperature. Displays the SPN, FMI, and OC for all failures. PV101-C Configuration Tool The PC Tool allows users to create, view, edit, and ** configurations of PV101-C.
Operating Voltage: 8-32 VDC Reverse Polarity: Withstands Reverse Battery Terminal Polarity Indefinitely at Operating Temperature Ambient Operating Temperature: -40° to 185°F (-40° to 85°C) Display** Temperature: -20° to 185 (-29° to 85) Storage Temperature: -40 O to 185°F, 5 psi (34 kPa) Power Supply Operating Current (at 14 VDC) 52 mA min. , 300 mA max (@32 VDC) max 1A (with LCD heater) CAN bus: SAE J1939 Compatible Case: Polycarbonate Polyester Max Panel Thickness: 3 8 inches (9.)6 mm) Auxiliary RS485 Communication Port: User configurable for Modbus Master or Modbus RTU Slave (default) Drive Optional PVA or PVM Meter Slave Provides User-Adjustable Communication Parameters Continuous Input: User Selectable for the following Backlight Potentiometers: 1 K Ohm, 1 4 Wmurphy Fuel Transmitter: 33 Ohm Man, 240 Ohm Null, Factory Standard, for use with Murphy fuel sensors. Programmable for non-murphy fuel transmitters. Shipping Weight: 1 lb (450 g) Shipping Dimensions: 5 x 6 x 6 inches (127 x 152 x 152 mm) Clamp: PBT Connector: 6-pin Deutsch DT series.