It is understood that there are many people who do not know much about the use of cutting fluid in Dongguan, this article is a related article introduction, welcome to read.
Cutting fluid is a lubricant used in industrial machining processes. It can be applied to the processing of all kinds of hard metals and cemented carbide, including iron, copper, aluminum, steel, stainless steel and other materials. The main function of cutting fluid is to provide lubrication, reduce friction and wear during machining, and thus extend the life of the tool.
The role of cutting fluid can be analyzed from the following aspects:
1. Cooling and cooling: In the process of high-speed cutting, the heat generated by the tool and the workpiece will deform the workpiece, reduce the surface quality, and even cause the tool to become tough, affecting the cutting effect. Cutting fluid can effectively reduce the temperature of the cutting area and prevent heat accumulation through heat absorption and cooling, thereby improving the cutting quality.
2.Lubrication and friction reduction: During the machining process, the friction between the tool and the workpiece will produce high friction, which is easy to damage the surface of the tool, produce wear and scratches. The lubricating properties of cutting fluid can effectively reduce the coefficient of friction between the tool and the workpiece, reduce friction, reduce wear and scratches, and improve cutting accuracy and surface quality.
3.Cleaning and scouring: Cutting fluid can also help to wash away chips and metal chips through spraying and cleaning, prevent them from accumulating on the machining surface during the cutting process, avoid the problem of stuck tools and chips in the cutting process, and improve processing efficiency and quality.
In addition to the above basic functions, cutting fluids have some other additional functions:
Anti-rust and anti-corrosion: adding a certain amount of anti-rust and anti-corrosion agents to the cutting fluid can effectively prevent metal materials from being affected by oxidation and corrosion during the processing process, and prolong the service life of the workpiece.
Dust removal and decontamination: Cutting fluid also has a good dust suppression effect in the machining process, which can take away the chips and dirt generated and keep the workpiece and tool clean.
Improve cutting performance: According to different machining requirements, various additives can be added to the cutting fluid, such as lubricants, anti-wear agents, foam inhibitors, etc., to improve cutting performance and workpiece quality.
Dongguan cutting fluid is mainly used for the processing of various hard metals and cemented carbide, which has the functions of cooling and cooling, lubrication and friction reduction, cleaning and scouring. In addition, it has additional functions such as anti-rust and anti-corrosion, dust and dirt removal and improved cutting performance. In the process of use, it is necessary to select the appropriate cutting fluid according to the specific processing situation and material characteristics, and the instructions must be carefully read before use, diluted according to the proportion and ensure that it is fully mixed evenly. At the same time, it is also necessary to regularly check and replace the cutting fluid to ensure its good working effect.