There are also a lot of relevant introductions on the Internet about the introduction of Zhongshan water-based cutting fluid, but it cannot meet everyone's needs, so let's explain it to you well, let's take a look!
Zhongshan water-based cutting fluid is a special lubricant suitable for the metalworking industry, with good cutting performance and cooling performance. It can effectively reduce cutting friction and temperature, prolong tool life, and improve machining quality and efficiency.
Preparation method: 1. Raw material preparation: The main raw materials of Zhongshan water-based cutting fluid include water, additives and emulsifiers. Additives can be selected according to specific needs, such as antibacterial agents, rust inhibitors, lubricants, etc. Emulsifiers are the key to connecting water and additives, and emulsifiers that can emulsify quickly and stabilize for a long time are generally selected.
2.Preparation ratio: According to the specific formula requirements, prepare the required raw materials and mix them according to the formula ratio. In general, water accounts for more than 90% of the formulation, with additives and emulsifiers accounting for the remaining 10%.
3.Stirring and mixing: Pour the prepared raw materials into the mixing container and mix thoroughly using the mixing equipment. The time and speed of stirring should be adjusted according to specific requirements, and it is generally necessary to stir until the lubricant and emulsifier are well mixed.
4.Filtration: The stirred and mixed liquid is filtered through a fine filter to remove impurities and particulate matter and make the liquid clearer and more transparent.
How to use: 1. Before the use of cutting fluid, it should be clean and free of impurities. Shake well before use to ensure that the various components in the liquid are evenly dispersed.
2.When using, spray or apply the cutting fluid evenly to the surface of the workpiece or on the tool to ensure that the coating area is uniform.
3.In the process of use, the cutting fluid should be re-applied in a timely manner according to the processing situation to maintain the wettability and cooling properties of the cutting fluid.
4.The waste liquid after the use of cutting fluid should be treated to avoid pollution to the environment.
The preparation and use of Zhongshan water-based cutting fluid is based on specific processing needs, which needs to be prepared according to the formula ratio, and then sprayed or applied to the surface of the tool or workpiece to achieve good cutting results. Reasonable use can effectively improve the processing quality and efficiency.