The emergency vent is part of the safety device of the multi-purpose coupling tank system and is usually located at the top or bottom of the coupling tank. It is an important safety pressure relief device used to quickly release excess pressure when the system pressure exceeds a certain limit to protect equipment and personal safety.
When the pressure inside the multi-function coupling tank rises and exceeds the set pressure of the safety valve, the emergency exhaust port opens quickly, allowing the excess pressure to be released immediately. This helps to prevent excessive pressure from damaging the coupling tank and other equipment in the system, while keeping personnel safe.
Emergency exhaust ports typically have the following characteristics:
1.Rapid response: Emergency vents should be designed to allow for rapid opening when system pressure reaches dangerous levels to release excess pressure as quickly as possible.
2.High reliability: In order to ensure safety, the emergency exhaust port should have high reliability and stability, and should not malfunction or stagnate during normal operation.
3.Clear signage: The emergency exhaust port should be clearly marked with the words "emergency exhaust port" so that the operator can quickly identify and take appropriate measures.
4.Proper installation location: The emergency exhaust port should be installed in an easily accessible location so that it can be used easily and quickly in an emergency.
It should be noted that the emergency exhaust port is only used when the system pressure exceeds the normal range, and it is strictly forbidden to vent or vent pressure through the emergency exhaust port under normal circumstances. At the same time, the emergency exhaust port should be checked and maintained regularly to ensure that it is working properly and in good working condition.