In the actual construction process, it is necessary to assemble the toll island mold in advance, and separate the two molds according to the size of the toll booth. Corners need to be fixed with tools. Due to the large size of the mold, a large amount of mud needs to be poured. When grouting, the nozzle is directly aligned with the inside of the mold, and the impact of the slurry is stronger. If the toll island mold is not fixed, the slurry may move due to the impact, resulting in a deviation in the size of the generated toll island. Therefore, the mold must be reinforced with parts. When the mold is removed, the mud has solidified and can be cured simply with clean water. After that, apply a striking paint.
The following points need to be paid attention to when assembling the toll island mold: First, make sure that the size and shape of the two molds are consistent, so as to ensure the accuracy and aesthetics of the toll island. Secondly, according to the size of the toll booth, the two molds need to be accurately separated to ensure that the toll island can adapt to the shape and size of the booth. Finally, it is necessary to use tools to fix the corners to prevent the mold from moving during the construction process.
The following points need to be paid attention to when pouring the mud: First, the strength and stability of the mud should be ensured, so that the firmness and durability of the toll island can be guaranteed. Secondly, the nozzle needs to be aligned directly with the inside of the mold to ensure that the mud can flow smoothly into the mold. Finally, you need to pay attention to the impact force of the mud, if the impact force is too strong, it may make the mold move or deform. Therefore, it is necessary to use parts to reinforce the mold to ensure the smooth progress of construction.
The following points need to be paid attention to when removing the mold: First, make sure that the mud has completely solidified, so as to avoid mud leakage or mold damage when removing the mold. Secondly, simple curing can be done with clean water to remove impurities and dirt from the surface. Finally, a striking paint can be applied to increase the aesthetics and durability of the toll island.