I. Introduction.
This year can indeed be regarded as a big year for DDR5 popularization, especially a wave of Hynix A-Die particles a while ago, allowing players to experience the feeling of 8000MHz+. However, A-Die is good, but there is also a problem, that is, if you want high frequency, there are currently only single-sided 16GB specifications, and two are only 32GB, which is still a bit stretched for some players with higher capacity needs;If you want a large capacity, you can only make it a double-sided 32GB specification, but the overclocking performance of double-sided memory is still a bit difficult to describe.
Fortunately, Hynix recently launched a new M-Die 3GB particle, which can achieve a specification of 24GB on a single side, and the two components of dual channels are 48Gb, plus the particle adopts a more advanced process, lower power consumption and heat generation, and greater overclocking potential, which can be described as a solution that takes into account both capacity and performance.
Acer Predator, as a well-known storage brand in China, is naturally not willing to be left behind, and has also launched related products of this specification, and what we want to share today is one of them - Ice Blade Hermes DDR5 6800 RGB 24G 2 (C34), the memory uses specially selected original M-Die (3GB) particles, with 6800MHz XMP frequency, obvious performance advantages, coupled with its white aluminum alloy vest and RGB light bar design, the appearance and playability are also very high, and the tossing process will be shared with you below.
Second, the unboxing introduction.
The outer assembly color of the memory is mainly black, supplemented by the renderings of the memory when working, which is eye-catching, intuitive and high-end.
On the back is an introduction to the technical characteristics of the product.
In addition to the manual、Warranty card,Memory accessories also come with a 4cm small fan,In fact, the memory is not used in the normal XMP frequency fan,But the heat is larger when overclocking,Installing a fan can greatly improve stability,This is still very intimate。
The memory is made of white high-thickness die-cast armor with solid materials and a thickness of up to 19mm, which provides a solid guarantee for the stable operation of memory.
At the same time, the appearance design of this heat dissipation vest is also very good, and the football ene pattern on the lower part is simple and atmospheric, with a sense of science and technology.
Back at a glance. 
In fact, some memory information can be interpreted from the label, such as its single capacity is 24GB, the frequency is 6800MHz (CL-34-46-46-108) after XMP is turned on, and the rated working voltage is DC 135v。
The memory uses an atomized light guide strip with 8 built-in independent light zones to achieve brilliant visual effects. The memory lighting effect also supports the synchronization of divine lights, and players can cooperate with the board factory software to achieve various customized gameplay methods and show a unique style.
The memory is designed with a 10-layer reinforced PCB board, with exquisite and solid gold finger workmanship, and has stronger electrical performance, so that it can impact higher frequencies.
The workmanship for other details of the memory is also very good.
3. Test and overclocking experience.
The platform configuration used in this test is as follows:
The Ice Blade memory fits quite well with the appearance of this configuration.
Close-up of memory. Let's start with a wave of lighting effects, the overall effect.
Positive effect. Close-up of memory lighting.
Look at it from a different angle.
Pure white is more temperamental.
Let's take a look at the hardware specifications and information of the memory.
There are 4 sets of preset frequencies for the SPD of memory, of which the first 3 groups are JEDEC frequencies, which are:
Group 1 is JEDEC 5266MHz (CL 42-43-43-85) with a voltage of 110v；Group 2 is JEDEC 5600MHz (CL 46-45-45-90) with a voltage of 110v；Group 3 is Jedec 5600MHz (CL 50-45-45-90) with a voltage of 110v。
Group 4 has a frequency of XMP 6800MHz (CL 34-46-46-108) and a voltage of 135v。
Let's start testing, the CPU-Z benchmark.
In this test, XMP was turned on compared to silent frequency, and the performance of both single-core and multi-core was slightly improved.
7-zip compression and decompression benchmarks.
In this test, compared with the silent frequency, the compression performance and decompression performance are significantly improved, and the compression performance is as high as 10The 43% increase is evident from the addition of high-frequency memory to office performance.
AIDA64 Cache & Memory benchmark.
In this test, compared with silent frequency, the read, write, and copy performance of the memory with XMP enabled have been greatly improved, and the improvement has been achieved respectively. 60% and 2279%。
At the same time, the latency has also been reduced by 140ns。
Productivity application test of self-leading transcoding performance test.
In this test, the time taken to transcode was reduced by 14 seconds compared to silent frequency with XMP turned on, a reduction of 1296%, which is also very impressive.
V-Ray CPU rendering test.
In this test, the rendering speed is significantly improved compared to silent frequency with XMP enabled.
3DMark Fire Strike test of graphics theory performance test.
In this test, compared with silent frequency, the total score, physics score and graphics score of XMP are improved to a certain extent.
3DMark Time Spy test.
In this test, compared with the silent frequency, the total score, physics score and graphics score have been improved well, and the CPU score has been significantly improved, which has increased by 501%。
Game test, here is a selection of 6 games such as "PlayerUnknown's Battlegrounds: Battle Royale", which eat more memory frequency, for comparative testing.
At 1080P resolution, the frame rate of each game has been greatly improved compared to the silent frequency with XMP enabled, among which "Rainbow Six: Siege" is the most, which has been increased by 2100 frames, the percentage of lift is 398%；They are followed by Far Cry 5 and Civilization 6, with an increase of 1500 and 1048 frames, with a percentage lift of 758% and 450%。
After the resolution was increased to 1440p, the improvement of each game has decreased, but some games still have a good improvement.
Overclocking test. The overclocking limit of the 14600kf 1st channel memory in hand is 8600MHz+, and the overclocking limit of the 2nd channel memory is 9000MHz+, so we first use the second channel to explore the single-channel limit of each memory.
After some debugging, the memory with the tail number 741 can finally go up to the high frequency of 8800MHz, of course, at this time, it is just to explore the limit, so the timing is not finely tuned, and the full auto setting is adopted.
The memory with a tail number of 742 is even better, and finally rushed to a high frequency of 9000MHz.
Then try the dual-channel overclocking limit, it should be noted here that since the voltage, timing and other parameters of the two channels and two memory of the CPU IMC are different, the parameters used when setting up dual channels cannot blindly copy the data of the single channel, but should be carefully tuned while taking into account the two.
After some debugging, the pair of memory can be lit at a dual-channel frequency of 8600MHz, but the stable operation needs to be slightly reduced by one gear to 8533MHz, and its timing is CL40 50 50 140.
The 8533MHz can also successfully pass the AIDA64 test.
To sum up, it can be seen that the read, write, and copy performance of the overclocked memory has been further improved, and the amplitude is relatively powerful.
At the same time, the latency is greatly reduced.
Fourth, summary. I have experienced the Ice Blade memory (DDR5 6800 16G 2) with 2GB chips (A-Die) before, and I am very impressed with its solid workmanship, excellent power supply, excellent performance and reliable quality. This time, the new version of the Hermes DDR5 6800 RGB 24G 2 uses M-Die 3GB particles on the basis of the continuation of the old version, the process is more advanced, and the overclocking potential is also very huge, and it easily exceeds 8533MHz on my platform. Of course, what impresses consumers the most is its 24G 2 specification in terms of capacity, which is 16GB more than the 16 2 specification, which can be described as a combination of capacity and performance, and I personally think it is very suitable for high-end gamers who have requirements for both capacity and performance.
The above is shared here, I hope it will help you with the machine, thank you for appreciating!