The production of concrete isolation belt mold is an important engineering task. In the production process, we first refer to the large sample drawing of the isolation zone for processing. The prefabricated parts produced in these molds, also known as isolation piers, are always used to protect roads and lanes, regardless of the name.
When carrying out construction, these prefabricated parts are usually placed on both sides of the road or according to daily needs. For example, some underground garages also have partition belts. The size of these concrete isolation belt molds is smaller, generally around 50 cm. It has aperture of the same size on both sides and can be connected in the middle. We can pass through the hole with something like a rope or a steel pipe and place it. This design allows them to be placed on both sides of the parking space and at the entrance and exit of the garage.
In daily use, in order to protect the concrete barrier, we apply a transparent protective agent to its surface. This reduces the problem of concrete defects when bumped. Next, we apply yellow, black or red and white paint to the surface, and we also attach reflective strips to the top. This allows people to see them clearly even in dim environments, thus avoiding the problem of vehicle crashes. In addition, the position of these isolation belts can be adjusted at any time.
The key points of knowledge about the concrete isolation belt mold, it is a large steel mold that we commonly use. The length of the mold we usually use is between one meter and two meters. In order to ensure sufficient compressive capacity, we chose steel plates with high strength, toughness and hardness as the manufacturing material. Other production materials have a hard time bearing the weight of concrete and keeping the surface of the mold flat.
We use sheet metal steel to make molds, and steel plate shearing and welding operations are carried out by electric welding machines. After these are done, we will polish to complete the production of a set of molds. The entire production process and operation methods are very simple. Each side of the mold is connected by bolt fasteners, and there is no gap between each two sides of the steel plate. This ensures that when we use concrete isolation belt molds for production, there will be no slurry running and leakage. The finished cement prefabricated blocks made by this mold have a beautiful appearance, smooth and shiny surface, very good compactness, and are strong and durable. To enhance the isolation effect, we can also apply brightly colored paint to the surface of the precast cement blocks to provide a warning to passing vehicles and pedestrians.
In summary, the fabrication of concrete separation belt molds is a key engineering task, which involves the important functions of highway protection and lane isolation. Through careful design and fabrication, we can ensure the quality and use of these molds. At the same time, it is also essential for protection and maintenance in daily use to ensure that they can perform their role for a long time.