Rubber appearance and size screening is an important quality control measure, which plays a key role in the production process of rubber products. Rubber is a common rubber product, which is widely used in automobiles, machinery, construction and other fields. In order to ensure that the quality and performance of the rubber rubber are as required, it is essential to screen its appearance size.
The purpose of the rubber sizing screening is to detect whether the size of the rubber slab meets the design requirements. In the production process, there may be a certain deviation in the size of the rubber mold, if it exceeds the allowable range, it will affect the use effect and safety performance of the rubber mold. Therefore, by screening the appearance and size of the rubber off, the unqualified products can be found and excluded in time to ensure product quality.
Rubber appearance size screening usually includes the following aspects. First, measure the length of the rubber to make sure it meets the design requirements. Secondly, the diameter of the rubber is measured to determine whether its size is acceptable. In addition, it is also necessary to check whether the wall thickness of the rubber is uniform and whether there are any obvious defects or damage. Finally, the surface of the rubber bump needs to be inspected to ensure that it is smooth and flat, with no obvious bumps or blemishes.
In the process of rubber sizing and sizing, some professional measuring tools and equipment need to be used. For example, tools such as calipers and vernier calipers can be used to measure the size of rubber bubs. At the same time, it is possible to use a microscope and other equipment to magnify the surface of the rubber to judge its quality more accurately.
The results of the appearance and size screening of rubber rubber will directly affect the quality and performance of rubber molding. If the size of the rubber is unqualified, it may lead to water leakage, air leakage and other problems in the process of use, and even affect the normal operation of the entire equipment. Therefore, rubber manufacturers should attach great importance to the appearance and size screening, establish a sound quality control system, and ensure product quality.
In short, rubber appearance and size screening is an indispensable part of the production process of rubber products. By screening the appearance and size of the rubber mold, we can ensure that the product quality and performance meet the requirements, and improve the use effect and safety performance of the rubber mold. Rubber manufacturers should strengthen the management and control of appearance and size screening to provide users with more reliable products.