Ceramic Lasi ring packing is a common bulk packing material that is used in various reactors, such as tower reactors, fluidized bed reactors, and fixed bed reactors. The following is the typical production process of Lassi Ring Filler:
1.Prepare raw materials: You need to prepare various raw materials, such as clay, limestone, etc., and mix them according to the formula ratio. 2.Stir and mix: Put the ingredients into a blender, add an appropriate amount of water and other additives, stir and mix well. 3.Molding: The mixed raw materials are put into a mold and molded by equipment such as a press or extruder. 4.Drying: Place the formed Lasi ring in a drying chamber to dry to remove moisture. 5.Firing: The dried Lasi ring is put into a high-temperature kiln to be fired, so that the organic matter in it is completely burned, and the inorganic matter is melted and crystallized. 
6.Cooling: Naturally cool the Lassi ring to room temperature after firing. 7.Sieving: The cooled Lassi ring is screened and sorted according to different specifications and particle size requirements. 8.Packaging: Packing the Lassi ring filler that meets the requirements for easy transportation and use. 
It should be noted that the above production process is only a general process, and the specific production process may vary due to factors such as raw materials, formulas, and production equipment. In the actual production process, it needs to be adjusted and optimized according to the specific situation.