Nowadays, the common water-based C6 waterproofing agent generally requires 160 high-temperature processing, because only under the condition of high temperature baking at sufficient temperature, the C6 waterproofing agent can be better cross-linked with the fabric to form a film, and play its waterproof, oil-proof and anti-fouling effect. However, what if the fabric itself is not resistant to high temperatures or high temperatures will cause the fabric to deform and yellow?Can't it be processed with water-based C6 waterproofing agent?The answer is of course yes, in order to cope with the situation that the fabric cannot be processed at 160 high temperature, Zhuangjie Chemical has developed a ZJ-560 water-based low-temperature C6 waterproof agent that can be cross-linked and formed into a film under 120 low temperature conditions, which is suitable forWith a variety of low-temperature processes and low heat-resistant fibers, the fabric can have a waterproof 100 points after finishing, and the static anti-siphon effect does not climb for 12 hours。In addition, the C6 waterproofing agent has excellent washability after finishing, and can still maintain excellent protective properties after multiple washes.
ZJ-560 low-temperature C6 waterproofing agent processed fabricIt is not easy to appear yellowing, and the feel becomes hard, tooIt does not change the basic properties of the fabric, such as breathability, applicable to:Cellulose, nylon, polyester and other fiber fabrics。Therefore, ZJ-560 low-temperature C6 waterproofing agent is widely used in:Low-temperature waterproof and anti-siphon finishing of ribbon factories, shoe material factories, yarn factories and other manufacturersMiddle. 