Spirax SARCO Differential Pressure Transmitter M610 II
Brief introduction. The M610 II differential pressure transmitter unit consists of two parts:
A high accuracy (0.1%).
A stainless steel three-way shut-off valve.
Note: These two parts have been assembled before leaving the factory.
Function. The M610 differential pressure transmitter unit receives data from primary instruments such as GIFLO or orifice plates.
Differential pressure signal and convert it into a 4-20mA analog output signal. Differential pressure changes.
The three-way globe valve on the transmitter can be used as a secondary globe valve and a pressure balance valve.
The differential transmitter performs a zero check.
Pipe connections. The interface on the three-way globe valve is:"NPT, center distance 54mm.
Wire connection. m20×1.5 threaded interfaces.
M610 technical parameters.
Range: min. 0 - 1326 mm H2O (0 -13 kPa).
max. 0 - 13256 mm H2O (0 -130 kPa).
Output 4 - 20 mA DC and Hart 52 Protocol.
Power supply 16 V - 45 VDC (non-certified applications).
16 v - 28 vdc (e ex ia 11c t4 / t5)
Pressure limit -1- 140 bar g
Temperature limits -40°C - 85°C (non-certified use), -40°C - 100°C (process).
Accuracy 01%, including linearity, hysteresis, repeatability.
Intrinsically safe ATEX EX II 1GD - E EX IA 11C T4 T5
Sealing class IEC IP67 (NEMA 6 6P), EMC radiation protection BS EN 61326:1997
Material Diaphragm - austenitic stainless steel 316L
Three-way globe valve - carbon steel.
Filling solution - silicone oil.
Body - stainless steel
Calibration. The M610 II differential pressure transmitter can be configured for a specific application. As.
If there is a change in the load condition or actual installation conditions, the M610 can be used from 0-1326mm
The range of water column (0-13kpa) and 0-13256mm water column (0-130kpa) is adjusted.
section, see the installation and maintenance guide for this product for details.
Spirax SARCO Differential Pressure Transmitter M610 II