Air bubbles and breakage are common problems when laying plastic flooring, and in order to avoid these problems, the following measures can be taken:
Avoid moisture and impurities: Before laying, make sure the floor is dry, clean, and free of moisture and other impurities. If there is moisture, you need to wait until the water has evaporated before laying it. At the same time, it is also necessary to avoid splashing water, oil and other substances on the ground during the construction process.
Use the right glue: choose the glue with a good brand reputation and use it according to the glue instructions provided by the manufacturer. Make sure that the glue is evenly applied and the right amount is applied to avoid accumulation or missing brushes.
Avoid excessive force: During the laying process, avoid excessive force or rapid laying, so as not to cause bubbles or damage to the plastic floor. At the same time, the splicing should be tight and flat to avoid obvious gaps.
Check the quality: After the laying is completed, the quality of the plastic flooring should be carefully checked, especially at the joints and corners. If bubbles or breakage are found, they need to be dealt with promptly.
Maintenance: During use, the plastic floor should be maintained regularly, such as cleaning, waxing, etc. This prolongs the life of the vinyl flooring and maintains its aesthetics and durability.
In short, in order to avoid bubbles and damage to plastic flooring, it is necessary to pay attention to ground treatment, glue use, construction skills and maintenance. Laying in accordance with the correct construction method and paying attention to details can ensure the paving quality and use effect of plastic flooring.