New home decoration, circuit laying is a big thing, we need to know the knowledge of home improvement wiring. Today, Xiaohua will talk to you. What are the wiring methods of the circuit at home and their respective advantages, so as to choose which suitable wiring method according to your needs.
At present, there are three main processes for indoor wire laying: large arc bend, point-to-point, horizontal and vertical.
1. Large arc bend wiring
This method is a common method for circuit laying in the fine decoration of residential buildings, and it is characterized by the large arc shape of the route when the corner of the wire pipe is routed.
Pros:
Curved traces avoid the "sharp angle" angles that come with right-angle traces, as well as the size and weight of the board.
Cons:
More materials are used, and the process requirements are high.
2. Point-to-point wiring
Point-to-point diagonal wiring is characterized by the shortest straight-line distance between mounting points.
Pros:
Between two points, the straight line is the shortest", which will save the decoration budget and reduce the cost to the greatest extentThe corners are relatively gentle, and it is not easy to leak electricity.
Cons:
The lines are chaotic and irregular;Drilling and nailing of buried pipelines in the future will easily damage the pipelines.
3. Horizontal, horizontal and vertical wiring
As the name suggests, horizontal and vertical is a method of laying out the circuit horizontally and vertically when laying out the circuit.
Pros:
It is beautiful and not messy, and the buried pipeline is easy to find, which is convenient for installing pendants on the wall in the later stage.
Cons:
Increasing the cost of renovation requires more materials than point-to-point.
Laying the basic principles
It can be thick but not fine
According to the actual situation, you can buy about 20% of the power greater than the limit, and there is no need to blindly increase the wire.
Can arc without angles
According to the relevant regulations, the angle of the dark pipe should be greater than 90 degrees, and there should be no direct and dead angles.
Here I recommend a book for zero-based Xi electricians, including a variety of physical wiring color pictures, hoping to help you better learn Xi electrician knowledge!