What is the difference between BLD3-87 pendulum needle reducer BLD3-87-3KW code name BLD3-87-4KW.
Model BLD2-87-1The deceleration rate of the 5kw cooling tower fan with locating bearing is 87, and the motor power is 15kw, 4-pole motor, frame number is No. 2, series is BLD;
BLD4-87-3 can be split on the outside of the end cover to turn the processing groove, when installing the oil seal, take out the spring first, and the oil seal is sawn off into an open shape, BLD5-87-5Analysis of the causes of oil leakage of 5kw reducer 1. Pressure difference between inside and outside the reducer: during the operation of the reducer, the friction of the moving pair is heated and affected by the ambient temperature, so that the temperature of the reducer increases, if there is no air permeable hole or air permeable hole is blocked, the pressure in the reducer gradually increases, and the higher the temperature in the machine, GR59-Y4-4P-1395-m1 countermeasures to control oil leakage of reducer 1, improve the breathable cap and inspection hole cover: the internal pressure of the reducer is greater than the outside atmospheric pressure is one of the main causes of oil leakage, if you try to make the pressure inside and outside the machine balanced, oil leakage can be prevented.
kaab57-y100l4-30.28-M4-90 OverviewRV series worm gear reducer is designed and manufactured according to technical quality standards. RV series worm gear reducer in line with the national standard GB10085-88 cylindrical worm gear and worm parameters on the basis of absorbing advanced technology at home and abroad, F157 speed ratio: 21653,52.91,117.5,23.76,66.9,117.5. Equal speed ratio.
rf37-90.77-m4gfaf67-1/61.07-Y90B5-M1 Gear Reducer FAF47-2932-y2.2-4p
Input mode: motor direct connection, motor belt connection or input shaft, connection flange input. Reducer 87DRS132M4 i=2151 No backstop M1-M4 Pad Blocks should not exceed three in height, and they can also be carried out with Tie Tie, but the reducer should be replaced with flat Pad Blocks after calibration.
RV50-80-Y7124 single-phase motor reducer ZDY250-28-i2, when installing the transmission parts on the output shaft, it is not allowed to hit with a hammer, usually using the internal thread of the assembly fixture and the shaft end, reducer BWD1
3-17-4\i
17 No backstop.
M1 domestic.
Reducer BWD3
i=13 No backstop.
Coaxial domestic.
Lime screw reducer RF57-Y15-4p-10.79-M2-D200 with motor.
Reducer, GK107-Y11-4P-5717-m4-b, 1 unit, with motor.
Reducer. trf88-y3-4p-27.84-M4-I, 1 unit.
Reducer RF77-1 1087-7.5kw
Planetary cycloid reducer XWD4-59-22 Including motor 3kw
Reducer MTJAB77-8870-m3-0° with servo motor.
rv130-10-p132sb5-fa-dz-b01
Reduction motor NFM reduction ratio 30 A111880580 16L Reduction Ratio 24:99 A111880580 12 motors 22KW 3*380VL reducer NMRV105-100 112B5-B3 TRCF04-111-28-2499-M1-P100 112B5 motor YEJ-100L1
Reducer GSA59-Y15-4p-19.54-m2-a+b-d35-270°-2
BLD3-87 pendulum pin reducer BLD3-87-3KW code BLD3-87-4KW is different what is GKAT-Y3-4P-2399-m3-b,xwed43-187-1.5kw,kf77-y11kw-4p-7.24-m6-270,bkf212br57-y0.18KW-4P-1658-M3-I reducer NRMV075-30-90B14, reducer BLY33-35 units 1 SCW315-42 reducer matching, K37-357-m0.18-S-V61-180 Gear Reducer KAF37-357-ae0.18-S-V, XWD6-71-4KW cycloidal reducer motor BLD13-23-55KW reducer TJ4 rack, GFF97-1 31-Y75KW-4P Gear Reducer XLED63 Output Shaft Bearing Bushing, Bar. Under normal circumstances, for the reducer of long-term continuous operation, the new oil should be replaced according to the operation of 5000 hours or once a year, and the reducer that has been out of service for a long time should also be replaced with new oil before re-operation. The reducer should be added with the same grade of oil, not mixed with different grades of oil, the same grade of oil with different viscosity is allowed to be mixed;RX77 has a ratio of 161,1.67,2.18,4.04,2.18,2.18 equal speed ratio. Reducer GKF77-Y75-4p-25.The 66-M4R stands for Ordinary Shaft Extension Foot Mount. Gearbox KD10RF07-522-Y22KW-4P-M1-J1-A reducer|The four series of KAT127A have high transmission efficiency and compact installation spaceGearbox KD12RF08-536-Y22KW-4P-M1-J1-A reducer|The KAT107A output mode is divided into hollow shaft output or solid shaft output, and the average efficiency is 94%. Gearbox KD15RF09-1365-Y22KW-4P-M1-J1-A reducer|kat97ar57 gear ratio: 1684,37.91,41.73,48.23,74.42,13.4 equal speed ratios. Gear reducer KD16RF09-2182-Y22KW-4P-M1-J1-A reducer|KAT87ARD means (Dual Shaft Type) Foot Shaft Extension Mounting, Shaft Input.
Gearbox reducer KD18RF09-4370-Y22KW-4P-M1-J1-A reducer|KAT77ARF147 flange diameter can be selected 450 or 550, KD03-2336-y1.5KW-4P-M1-J1-A reducer|KAT67A Gear Reducer RX: Single-stage foot mount RXF: Single-stage flange mounting. Gear reducer KD04-3961-y1.5KW-4P-M1-J1-A reducer|KAT57AM3 bottom mounting, M4 vertical mounting. Gear reducer KD05-6081-y1.5KW-4P-M1-J1-A reducer|The KAT47AF47 has a speed ratio of 17413,104.33,16.25,56.49,49.34,25.72 equal speed ratio.