Software Quick Start.
Topics in this section. Software startup and exit, main interface introduction, definition number, quick operation process, explanation of terms, common operation methods.
This section describes how to get started with 3D takeoff software, including starting, exiting, and normal operation of the software. The terminology and conventions used in the manual are also explained in this chapter. You may have never been exposed to 3D takeoff software before, and this section of "Software Quick Start" plays a key role in your mastery and understanding of the operation of 3D takeoff software, and it is also essential to help you operate the software correctly.
Project management. Topics in this section.
Create a new project, open a project, save a project, save a project, restore a floor, set up a project, merge a project, set a password, and exit the software.
This section describes how to create, open, save, and restore a project file in the software, and also describes the project setting information and the structure of the project file.
2.1 New project.
Function description: Create a new project.
Menu location: [File] [New].
Command code: tnew
Instructions: This command is used to create a new project. If the current project has been modified, the program will first ask if you want to save the current project (Figure 2-1).
When you click Yes or No, the New Project dialog box (Figure 2-2) pops up and asks you to enter a new project name. Enter the name of the new project in the file name field, click the Open button, and the new project will be successfully established. A project is represented by a folder, and the "Project 1" folder consists of the files shown in the figure.
A project is primarily composed of drawing filesdwg and database filesMDB composition, one of the floors corresponds to a drawing file, there will be N drawing files for n floors, for which floor corresponds to which drawing file, please refer to the Floor Settings page in the project settings command. In addition, there are a lot of temporary files in the project folderJGK is used to store temporary data after engineering statistics∗_bak.The mdb is a backup of the project database file∗.bak is a backup of all floor drawing files;∗.TMP is a record file that saves the most recently opened floors, and all of the above temporary files can be deleted.
Open the project. Function description: Open an existing project.
Menu location: [File] [Open].
Command code: topen
Instructions: This command is the same as that of a new project, if the current project has been modified, the program will ask whether to save the original project. Pawn order.
Click the Yes or No button to bring up the Open Project dialog box (Figure 2-4).
If you have a lot of folders in the dialog box, double-click the folder you want to open and the folder will be opened (Figure 2-5).
Select "."mdb" file, click the [Open] button to open a new project, be careful not to select the backup file "bak."mdb" as the project that needs to be opened.
Tip: Double-click on "."mdb" filename, you can also open the project.
Save the project. Function Description: Save the current project.
Menu location: [File] [Save].
Command code: ts**e
This command is used to save the current project.
Save the project. Function description: Save a copy of the current project.
Menu location: [Project] [Save As].
Tool icon: None.
Command code: ts**eas
Instructions: After executing the command, the Save Project As dialog box pops up, specify a new project file name in the file name field, click the [Save] button, and the current project will be saved as a project file. As shown in Fig.
Restore the floor. Function description: When the computer suddenly loses power or crashes unexpectedly, you can use the resume project command to recover the recently saved floor drawing file.
Menu location: [File] [Restore Floor].
Command codename: HFLC
Instructions: After the command is executed, the Open Project dialog box is displayed (Figure 2-7).
In the dialog box, select the . . under the project folder you want to openmdb file, double-click or click Open to display the Project Recovery dialog box (Figure 2-8).
Select the name of the story you want to recover, click the OK button or double-click the story name to successfully restore the most recently automatically saved drawing file for that floor. For details on auto-save settings, please refer to [Tools] [System Options].
If you can't find the automatic backup file, the optional file on the right is empty.
Note: If you want to restore a drawing file for a floor, verify that the floor is currently not open.
Project settings. Function Description:
Set up some basic information about the project you're doing.
Menu Location: Quick Menu [Project Settings].
Command code: gcsz
Instructions: After executing the command, the "Project Settings" dialog box pops up, there are 6 project pages, click the [Previous] or [Next] button, or directly click the project name in the left option bar, you can switch between the pages.
1 Metering mode.
The Metering Mode page is shown in the image.
Option: Project Name: Specify the name of the project.
Calculation basis] Select the inventory library and the quorum library, which is also the choice to determine which region to use for localization settingsFor the selection of list and quota mode, you can hook the list and quota items of the component in the list modeIn quota mode, only quota entries can be hooked to components;When the components in the interface are not attached to the list or quota, the engineering quantity is output in the form of physical quantity, and the physical quantity in the list mode has the option to output the engineering quantity according to the list rule and the quota rule, and the physical quantity in the quota mode is output according to the quota rule.
Import Project] is used to import the settings of its project, click the button to pop up the "Import Project Settings" dialog box (as shown in the figure), and the settings that can be imported with this function are as follows:
Rebar Options: Import the settings of rebar options, including basic settings, joint types, and so on.
Takeoff Options: Import the settings of takeoff options, including calculation rules and quantity output settings.
Structure Description: Import the settings of the structure description in the project settings.
Project Features: Import the settings of project features in the project settings.
Sporadic Calculation Table: Import quantities for the sporadic part of quantities.
Method: Import a combination of saved practices from other projects.
Click the [Illustration] button next to the "Select Project" column to pop up the "Open Project" dialog box, and select "."mdb" database file, check the content to be imported in the import settings, and click the [OK] button to import the corresponding settings in the source project into the current project.
Note: 1) When importing a project, you cannot select this project to import.
2) It is best to set the calculation basis before importing the project. If the calculation basis of the source project and the current project are different, the system shall prevail according to the calculation basis set by this project.
3) When importing the structure description, it should be noted that the floor name set in the structure description of the source project and the floor name of the project may be different, and the floor setting in the structure description needs to be adjusted after importing.
4) The Import Project function overwrites the original settings after you use it, so it is recommended that you use this function when creating a new project.