Silicone adhesive double-sided adhesive treatment agent is an efficient and convenient adhesive, which is widely used in the bonding of silicone materials and other materials. However, for the best bonding results, proper application is crucial. Here are some tips on how to properly use the silicone adhesive double-sided adhesive treatment:
Clean the surface: Before using the silicone adhesive double-sided adhesive treatment, make sure that the surface to be bonded is clean, dry, and free of oil or dust. Slight dirt or grease can affect the bonding effect.
Gluing: Apply the silicone adhesive double-sided adhesive treatment agent evenly to the adhesive surface of the silicone material. The amount of glue should be moderate, not too much or too little. Too much may cause the bond line to overflow, and too little may affect the adhesive strength.
Drying: After gluing, let the silicone material dry naturally to ensure that the treatment agent is completely dry. The drying time depends on the ambient temperature and humidity, generally 1-3 minutes.
Lamination: Hold the silicone side coated with a silicone adhesive double-sided adhesive treatment tightly together with another material, removing all air bubbles and ensuring complete contact.
Pressure: During the pressure application process, the pressure should be applied evenly so that the silicone material is tightly combined with the material to be bonded. The pressure should not be too large or too small, so as not to affect the bonding effect.
Curing: Hold the adhesive part under a certain pressure or hold it for a period of time to allow the treatment agent to fully cure. Depending on the ambient temperature and humidity, the curing time varies, generally from 30 seconds to 2 minutes.
Storage: Silicone adhesive double-sided tape treatment should be stored in a cool, dry place, away from direct sunlight and high temperatures. The cap should be tightly closed after use to maintain the quality and effectiveness of the treatment agent.
Safety: Silicone adhesive double-sided tape treatment contains chemical ingredients, avoid prolonged contact** or inhalation of gases. In case of accidental splashing in eyes or contact**, rinse immediately with plenty of water and seek medical attention promptly.
Follow the above recommendations and use the silicone adhesive double-sided adhesive treatment correctly to achieve better bonding results, while also ensuring the safety and reliability of use.