There are also a lot of relevant introductions on the installation of wear-resistant floor armor joints, but they can not meet everyone's needs, so let's explain it to you well, let's take a look!
Abrasion resistant floor armor joint is a device specially designed for concrete floors to enhance the wear resistance and compressive properties of the floor. In the process of laying concrete floors, in order to avoid problems such as cracks or fractures in the ground, sub-silo joints are used to divide the floor area so that it forms a series of small pieces, thereby reducing the pressure on the floor as a whole.
When installing the armor joint of the wear-resistant floor, it is first necessary to determine the width and depth of the armor joint. Depending on the floor area and the expected load, the appropriate size can be selected. In general, the width of the armor joint should be between 10-20 mm, and the depth is determined by 30-50% of the thickness of the floor. This effectively avoids the possibility of cracks and fractures on the floor surface.
When installing armor joints, special tools and materials are required. Use a cutter to mark the floor and determine the separation area. After that, use a cutting machine or hammer with a milling cutter to cut out the bin seam. Make sure the cutting edges are neat and smooth for subsequent processing.
Next, the armor seam needs to be caulked. You can choose between polyurethane elastic caulk or epoxy caulk, depending on your needs. The caulk should be filled to the depth of the armor joint to ensure that the caulk is flush with the floor surface. The selection of caulk should be determined according to the use environment and requirements of the floor to ensure that the caulking floor has good flatness and compressive performance.
After the installation of the armor joint, the relevant maintenance work is also required. In general, the maintenance time of armor joints is 7-14 days. During the curing period, care should be taken to avoid the rolling of heavy equipment and goods to prevent damage to the armor joints. After the curing is completed, the surface treatment of the floor can be carried out as needed, such as applying dustproof agent or anti-scratch brush, so as to improve the wear resistance and aesthetics of the floor.
The installation of wear-resistant floor armor joints is to ensure the wear resistance and compression resistance of the floor. Through the treatment of silo joints and caulking, the cracking and fracture of the floor can be effectively avoided and the service life of the floor can be improved. During the installation process, it is necessary to pay attention to the selection of appropriate cutting tools and caulk, and carry out the correct maintenance work to ensure the stability and aesthetics of the floor.