The thickness selection of FRP cover mainly depends on its place of use and use. In the car wash, the 38mm thickness of the FRP grille is often selectedElectroplating equipment factories commonly use 25mm thickness grating plate;In sewage treatment plants and chemical plants, 38mm thick FRP grating plates are commonly used. In addition, there are other common thicknesses of FRP cover, such as 13mm, 20mm, 25mm, 30mm, 38mm, 40mm, 50mm, etc., and the bearing capacity and ** corresponding to these different thicknesses are also different.
There are several factors to consider when choosing the thickness of the FRP cover, including the use scenario, load, service life, etc. Here are some suggestions for choosing the thickness of the FRP cover:
Use scenarios: Different scenarios have different requirements for FRP covers, such as using them on sidewalks, and you need to choose FRP covers with a larger thickness to ensure the safety of pedestrians.
Load: The bearing capacity of the FRP cover increases with the increase of thickness, so it is necessary to select the corresponding thickness of the FRP cover according to the specific use needs.
Service life: The thickness of the FRP cover plate has a close relationship with the service life, and the service life can be extended by choosing the appropriate thickness.
When choosing the thickness of FRP cover, it is necessary to comprehensively consider the above factors and refer to relevant standards and specifications. At the same time, it is recommended to choose experienced manufacturers and professional installers to ensure the quality and use of FRP covers.