A large soft reservoir is a facility used to store large amounts of rainwater for irrigation, industrial use, or other purposes. It is usually made of polymer or rubber material with good sealing and weather resistance. The following is a construction plan for a large soft reservoir.
Site selection: Choose a site that is suitable for the construction of a large soft reservoir, usually in a place where there are no underground pipes or other underground facilities. Ensure that the site has enough space to accommodate the reservoir and is close to the source and the place where it is used.
2.Land Preparation: Remove weeds and trash at selected sites and make sure the ground is level. If the ground is uneven, it needs to be filled and leveled to ensure the stability of the soft reservoir.
3.Foundation construction: Dig an appropriately sized pit in the ground to accommodate the soft reservoir. The size of the pit depends on the capacity and design of the reservoir. Make sure the bottom of the pit is flat and incorporate appropriate support structures where needed to increase the stability of the reservoir.
4.Installation of the cistern: The soft cistern is unfolded and placed in the prepared pit. Make sure that the edge of the reservoir is aligned with the edge of the pit and that the bottom of the reservoir is in close contact with the bottom of the pit. Use weights or other fixtures to secure the cistern in the pit to prevent it from moving.
5.Connecting pipes: Install inlet and outlet pipes on the sides or bottom of the soft reservoir as required. The inlet pipe should be connected to the water source, and the outlet pipe should be connected to the place where the water is used. Make sure the pipes are tightly connected and sealed with appropriate sealing materials to prevent water leakage.
6.Testing and Adjustment: After completing the pipe connection, testing is carried out to ensure that the soft reservoir is working properly. Fill the reservoir with water and observe for leaks or other issues. If there is a problem, fix and adjust it in time.
7.Environmental protection: During the construction process, attention should be paid to protecting the surrounding environment. Ensure that waste and waste materials from the construction site are properly disposed of and do not pollute the surrounding soil and water sources.
8.Maintenance and management: After the construction of the soft reservoir is completed, regular maintenance and management are required. Clean up the debris and dirt in the reservoir, ensure the smooth flow of the inlet and outlet pipes, and regularly check the tightness and stability of the reservoir.
The construction plan of a large soft reservoir requires a comprehensive consideration of site selection, land preparation, foundation construction, reservoir installation, pipe connection, testing and adjustment, environmental protection, and maintenance and management. Only when these factors are fully considered during the construction process can the normal operation and long-term stability of the soft reservoir be ensured.