With the development of technology, the thermos cup not only exists to maintain the temperature of the water, but also incorporates many intelligent elements, the most common of which is the temperature display function. However, when using a thermos mug with a temperature display, we sometimes experience low batteries. So, how to replace the battery of the thermos cup?This article will introduce the battery replacement steps of the thermos cup in detail.
1. Preparations.
Before we start replacing the battery, we need to prepare some tools and materials. The details are as follows:
1.Prepare a new coin cell battery, usually CR2032;
2.A small screwdriver for unscrewing the screws at the bottom of the thermos cup;
3.A clean cloth or paper towel to clean up dust and debris from the inside of the thermos.
Second, the disassembly steps.
By following these steps, you can easily unscrew the screws on the bottom of the thermos cup and remove the battery:
1.Turn the thermos cup upside down and place it on a stable tabletop;
2.Use a screwdriver to gently unscrew one of the screws at the bottom**. After unscrewing, please take care of the screws properly to avoid loss;
3.Gently push the thermos cup shell upward, taking care not to use too much force to avoid damaging the internal components
4.At this time, you can see the battery** at the bottom of the thermos cup. Use a screwdriver to gently pry up the old battery, being careful not to use too much force to avoid damaging the battery compartment;
5.After removing the old battery, use a clean cloth or paper towel to clean the dust and debris inside the battery compartment.
3. Installation steps.
Once you're done cleaning up, you can start installing a new battery:
1.Place the new battery with the lettered side up and push it into the battery compartment;
2.Gently press down on the new battery with a screwdriver, making sure it is in close contact with the bottom of the battery compartment;
3.Push the thermos cup shell back into place and tighten the bottom screws
4.Set the thermos cup upright, and the temperature should be displayed normally.
4. Precautions.
During the battery replacement process, please note the following:
1.Make sure you are using the correct type of coin cell battery;
2.Do not pry or rotate the old battery forcefully to avoid damage to the battery compartment or internal components;
3.Before installing a new battery, make sure its positive and negative poles are placed correctly;
4.Once the replacement is complete, the mug should be able to work fine. If the temperature still doesn't display properly, check that the battery is installed correctly or consider contacting after-sales service.