A flush toilet is a type of toilet bowl with high efficiency that is usually placed in a bathroom or toilet. There are a few things to look out for when installing a flush toilet, the most important of which is the proper installation of the drain. The following are the steps and precautions for the installation of the flush toilet drain.
Installation Steps:1Measure the location of the drain hole: You first need to measure the location of the drain hole and then mark it on the ground. The drain hole should be located at the back of the toilet, adjacent to the wall.
2.Installing the outfall: Installing the outfall requires the use of a large-diameter drain and an adapter. First, install the adapter in the location of the drain hole, and then connect the drain pipe. The drain pipe should be sealed with the adapter.
3.Install the toilet: Place the toilet upside down on the ground and place the sealing rubber gasket on the drain. Then tilt the toilet slowly and clamp it between the gaskets. Then tighten the bolt with a wrench to secure the toilet to the ground.
4.Connecting the drain pipe: To connect the drain pipe, you need to remove the cover plate and then connect the drain and the drain pipe. The drain should be connected directly to the sewer in the wall.
5.Test the toilet: Finally, you need to test whether the toilet is working properly. Fill the toilet tank with water and gently press the toilet button. If the water can drain smoothly from the toilet, then it is ready to use.
Notes:1The location of the blowdown must be installed correctly. If the drain hole is too far from the wall, you may need to use an extension tube.
2.A tight seal needs to be maintained between the drain and drain pipe. Otherwise, leakage problems may occur.
3.When installing the toilet, the sealing rubber gasket must be installed correctly. Otherwise, it may cause water leaks or taste problems.
4.When testing the toilet, make sure that there is enough water in the tank. Otherwise, the toilet may not function properly.
5.If you are unsure about the installation steps, consult a professional. They can provide you with more guidance and advice.
In conclusion, proper installation of the drain outlet is a crucial step in installing a flush toilet. As long as you follow the right steps to install, you can enjoy the many benefits of installing a flush toilet.