HEIDENHAIN CNC system power module indicates that the red light is on and does not output troubleshooting
The power module of HEIDENHAIN CNC machining centers is one of its important components. However, in the process of use, many users will encounter problems such as the power module indicating red light and no output.
1. Problem description.
1.CNC system center: when the alarm appears on the CNC system panel, the driver lights up red.
2.HEIDENHAIN power supply: During use, when the power supply is grounded faulty, short-circuit tripped, unable to close, fuse burned out, etc., the power module indicator will be red light.
3.HEIDENHAIN Drive: When using the driver, sometimes there is no output or the output driver cannot be reset due to alarm.
Second, maintenance methods.
1.CNC system center: When there is an alarm on the CNC system panel, you need to query the corresponding meaning according to the system manual to determine the problem. Some alarms may be false positives and need to be ruled out on their own. If it can't be solved, it is recommended to contact a professional engineer for repair.
2.HEIDENHAIN power supply: When the HEIDENHAIN CNC power module has ground fault, short circuit tripping, failure to close, fuse burnout and other faults, the power module needs to be sent back to the manufacturer for repair. Heidenhain power modules generally have a one-year warranty, if they need to be repaired beyond the warranty period, the cost is generally less than 1000 yuan.
3.HEIDENHAIN Drive: When using the driver, there is no output or the output driver has an alarm that cannot be reset, etc., first of all, you need to check whether the connection and settings of the drive are correct to ensure that the drive can work normally. If it still can't be solved, it may be caused by an internal fault of the drive and needs to be sent back to the manufacturer for repair.
3. Summary. The above is the method and introduction of the power module of HEIDENHAIN CNC machining center when the red light is on and does not output the fault maintenance. In use, if the power module indicator light is on and cannot be output, you need to choose the corresponding maintenance method according to the specific situation, or contact Shanghai Yangon to help you repair. Taking good care of the various components of the CNC machining center can prolong its service life and avoid unnecessary losses.