The article is provided by Jinan Sanquan Intelligent Technology***.
A tape adhesion tester is an instrument used to test the adhesion properties of adhesive tapes. It works by attaching the tape to the test board and then hanging the test board on an adjustable stand with a weight attached underneath the bracket. By gradually increasing the weight of the heavy object, observe whether the tape is pulled off or torn to evaluate its stickiness. 
When using the tape holding adhesion tester, you need to pay attention to the following points:1Ensure that the surface of the test board is clean and flat, free of oil, dust and other impurities, so as not to affect the test results. 2.When applying the tape, it should be applied to the test plate smoothly and air bubbles should be excluded so as not to affect the test results. 3.When adjusting the height of the bracket, the distance of the bracket should be reasonably adjusted according to the width and thickness of the tape to ensure the accuracy of the test results.
4.When performing the test, gradually increase the weight of the heavy object, observe the changes in the tape, and record the weight of the tape when it is pulled off or torn. 5.After the test is completed, the test site should be cleaned up in time to avoid affecting the next test. 
In conclusion, the tape adhesion tester is a very practical instrument that can help us understand the adhesion performance of various tapes, so as to better select and use adhesive tapes. By using this instrument, we can obtain more accurate and reliable test results, which provides better support and guarantee for our production and R&D. For more information, please contact Jinan Sanquan Intelligent Technology***