Operational descalers are chemicals specifically designed to remove scale layers during the normal operation of equipment. In contrast to traditional shutdown cleaning, running descalers can be cleaned without stopping the equipment, thus avoiding the impact on production during the cleaning process. This descaler is especially suitable for equipment that requires continuous operation and cannot be easily shut down, such as boilers, evaporators, heat exchangers, etc.
The scale layer is usually formed by the deposition of hardness ions, impurities, microorganisms, etc. in the water on the surface of the equipment, which will affect the thermal efficiency, service life and safety of the equipment. Therefore, the use of operating descalers can remove the scale layer on a regular basis, maintaining the normal operation of the equipment and extending the service life.
The main components of a running descaler usually include antiscalants, cleaning agents, corrosion inhibitors, etc. Antiscalants inhibit the formation of new scales, cleaners break down and remove layers that have already formed, and corrosion inhibitors protect equipment from the corrosion that can occur during cleaning. In addition, the operation descaler also has good cleaning performance and environmental protection, and will not cause harm to the equipment and the use environment.
When using a running detergent, you need to follow the manufacturer's recommendations to ensure the correct dosage and timing of dosing. In addition, considering that water quality and scale composition may vary from place to place, it is best to conduct a small-scale trial before use to determine the best cleaning solution.
It is important to note that although descalers can be cleaned while the equipment is running, it still needs to be handled with caution to avoid unnecessary damage to the equipment. In addition, after cleaning, the equipment needs to be properly rinsed and neutralized to ensure that the chemical environment inside the equipment returns to normal.
When using the operating descaler, it is necessary to select the appropriate type and concentration of the agent according to the specific situation and requirements of the equipment. At the same time, it is also necessary to pay attention to the method and time of adding chemicals, as well as the steps of rinsing and neutralization after cleaning to ensure the cleaning effect and safety.