GB 50116 Code for the Design of Automatic Fire Alarm Systems is a Chinese national standard used to guide the design, installation and application of automatic fire alarm systems. This standard stipulates the general principles, wiring, equipment requirements, linkage control and other contents of the automatic fire alarm system design, aiming to ensure the effectiveness and reliability of the automatic fire alarm system in the building.
According to the specification of GB 50116, the design of the automatic fire alarm system should fully consider the structure, use, fire risk and other factors of the building, so as to ensure that the system can detect the fire situation in a timely and accurate manner, and call the alarm in time, so as to take corresponding fire extinguishing and evacuation measures. At the same time, the standard also stipulates specific requirements for equipment selection, installation location, linkage control and other requirements of the automatic fire alarm system to ensure the reliability and stability of the system.
According to the relevant specifications of GB 50116, the following aspects need to be considered when designing an automatic fire alarm system:
The structure and purpose of the building.
Fire risk assessment.
Selection and layout of alarm equipment.
Linkage control of the system.
Reliability and stability of the system.
In short, GB 50116 "Code for the Design of Automatic Fire Alarm System" is a Chinese national standard, which puts forward specific requirements for the design, installation and application of automatic fire alarm system to ensure that the system can be found and alarmed in a timely and effective manner in the event of a fire, so as to ensure the safety of life and property of personnel.
The design of automatic fire alarm systems in hazardous waste storage rooms needs to follow relevant codes and standards to ensure that fires can be detected in time and effective measures can be taken to prevent fire risks. While I can't directly provide details on a specific standard, in general, there are a few things to consider when designing the system:
Select the appropriate alarm equipment: According to the characteristics of the hazardous waste temporary storage room and the fire risk assessment results, select the automatic fire alarm equipment that meets the requirements of the standard, such as smoke detectors, temperature detectors, etc.
Layout planning: According to the size, structure and layout of the temporary storage room, the layout of the automatic fire alarm equipment is reasonably set to ensure that the fire risk area can be fully monitored.
Linkage control: The automatic fire alarm system should be linked with other safety facilities, such as automatic sprinkler system, smoke exhaust system, etc., to achieve comprehensive fire emergency treatment.
Reliability and stability: The reliability and stability of the equipment should be considered in the design, to prevent false alarms or false negatives, and to ensure that the system works normally under various environmental conditions.
It should be noted that the design of the automatic fire alarm system in the hazardous waste temporary storage room needs to follow the relevant national standards and specifications, as well as local fire regulations, to ensure that the design scheme meets the requirements of laws and regulations.
In short, the design of the automatic fire alarm system in the hazardous waste temporary storage room needs to be combined with the specific situation, select appropriate equipment, reasonably plan the layout, realize linkage control, and ensure the reliability and stability of the system, so as to ensure the effective monitoring and emergency disposal of fire risk in the temporary storage room.