The AQ air sensor FCP38-64 can detect 2mm air bubbles
Devise. The AQ air sensor is compact from one part and the inside is smooth, RA<04 um 。
All wetted parts are made of acid-resistant steel or polypropylene. AO air sensors can be CIP (Clean in Place) and steel air sensors can also be SIP Vapor in Place) temperatures up to 130 degrees Celsius. AQ air sensor is traceable and has 2All connections of the 1B certificate (polypropylene) and 31B certificate (316L steel) are standard triple clamp connections with good sterility for easy installation and removal.
Install an air sensor.
One or two air sensors SAC, CCS, PAC, FCS or FCP can be connected to an ultrasonic controller D72 or DP72 or D128. The installation of air sensors should comply with national regulations. Installation should be carried out by someone with the required knowledge. The Air Sensor SAC and Air Sensor PAC have a chassis connector. Cables must be ordered separately. The cables for the air sensor FCS and air sensor FCP are fixed and non-removable.
The air sensor CCS has a fixed cable with connectors. Select the extension cable from the chart.
General parameters. Operating temperature 0-80
Maximum temperature range -20-80
Maximum pressure 700kpa 20 , 500kpa 50 , 50kpa 80
Protection class IP67
Pipe roughness <1 m
AQ Air Sensor, PP (Polypropylene) Type FCP.
fcp4-25
fcp6-25
fcp10-25
fcp14-25
fcp22-50
fcp38-64
FCP38-64 technical parameters.
Inner diameter (mm) 38
Outer diameter (mm) 76
Outer length (mm) 100
Pipe connection TC64mm
Material wetting part pp
Standard cable length (m) 5
The AQ air sensor FCP38-64 can detect 2mm air bubbles