Greenlink has launched a time capsule fast charging cable, this data cable is made of food-grade silicone material, using an integrated glue pouring process, which is dirty and stain-resistant, and supports the use of -20 to 70 temperature ranges. The cable is available in four colourways: Romantic Cherry Blossom Pink, Pure Light Lagoon Blue, Fresh Mint Green and Subtle Satin Black.
This cable has dual USB-C ports and a length of 15 meters, support 20V5A, 100W data transmission, and support USB20 data transmission, meet the use of mobile phones and laptops for fast charging. The following charging head network will bring the dismantling of the green time capsule fast charging cable, and take a look at the internal materials and workmanship.
The front of the packaging box is printed with the UGREEN brand, the product name - time capsule fast charging line, and a **cat pattern is also printed in the center.
The three major selling points of the product are printed on the side: skin-friendly and delicate, fast-charging notebook phone, and durable.
Product specifications are printed on the back as well as business information.
Close-up of the parameters on the box, and the following is the test and verification of the wire.
The package contains a data cable and a certificate of conformity.
The green time capsule fast charging cable is blue with a rubber cable tie of the same color, and the overall design takes a delicate style.
In addition, some parts of the wire head shell are designed in cream white for contrasting colors.
The case is designed with the UGREEN brand, a raised plus sign and the word 5A, and there are many details.
USB-C male close-up, non-full PIN design inside.
The protective tail and shell are integrated into the design.
The data cable body is flexible and elastic, and the outer skin is made of skin-friendly material, which feels good in the hand.
The measured length of the green time capsule fast charging line is 150cm.
The diameter of the wire body is 445mm。
The total weight of the wire rod and rubber cable tie is about 60g.
Using the ChargerLab Power-Z KM003C, the cable with an E-marker chip is measured, with a power transmission capacity of 20V5A and a data transmission capacity of USB 20。
In terms of pressure drop test, the test data results of 11 gears of the wire rod are shown in the table above.
Drawing a histogram, it can be clearly seen that the gear with the largest voltage drop difference is 0. at 20V5A54V, the lowest difference is 011v。
Finally, use this data cable with Greenlink's own 140W fast charging charger to charge Apple MacBook Pro, and the charging power is measured to be 1956v 4.6a 89.91W, successfully turn on 20V5A PD fast charging.
After reading the unboxing and testing of the Greenlink time capsule fast charging cable, let's disassemble it and take a look at the materials and workmanship of this data cable.
First, a cutter is used to cut the white plastic shell of the cable, and the metal shell is spot welded on the inside.
The metal case is wrapped in transparent soft rubber.
The soft glue wrapped in the metal housing is removed, and the housing is connected to the USB-C terminals by laser spot welding.
Disassemble the metal shell, and fill the translucent hard plastic insulation support between the terminal PCB board and the shell.
Translucent filled plastic is insulated with high-temperature tape on the outside and copper foil on the inside.
Remove the plastic covering the terminal plate and solder the e-marker chip on one side.
The other side is welded to connect the wires.
E-marker chip silk screen 332A, is Hynetek HUSB332A, HUSB332A is a USB Type-C electronic tag chip (USB eMarker). Support USB PD31 EPR extended power range, certified by the USB-IF Association, TID number: 4324.
The HUSB332A has an integrated RA resistor and an integrated VCONN diode to achieve a zero-peripheral design. The built-in Flashable Memory Unit (OTP) supports multiple flashing. The HUSB332A can also support the flashing of Type-C headers or ready-made cable systems through CC pins. The CC, VCONN1, and VCONN2 pins of the HUSB332A all support high withstand voltages of 25V.
The wire is soldered to the terminal plate, and the solder joints are rounded and full.
Continue to disassemble the terminal on the other end and cut the shell, which is wrapped in the same soft rubber.
The metal housing is fixed to the USB-C terminals by laser spot welding.
Translucent filled plastic is insulated with high-temperature tape on the outside and copper foil on the inside.
Clean off the filled plastic, and weld the connecting wires on one side of the small plate.
The other side is reserved for the e-marker chip.
Cut the data cable to observe the cross-section, two red thick cores are positive power cores, four bare cores are used for negative power transmission, and USB2 is in the middle0 data cable, shielded by aluminum foil, blue CC core above, yellow VCONN core below.
The power and data cores inside the cable are at a glance, and the inside is filled with tensile cables.
A list of the internal cores of the cable, in order, are the negative power core, the positive power core, USB20 shielded wires, CC cores and VCONN cores. Let's start with a detailed introduction to the core design inside the cable.
The two red cathode power cores are tinned copper wires with tensile wires inside.
Close-up of a blue CC core with a tensile wire inside.
The yellow vconn core also has tensile wires inside.
For USB20 transmission data cable, with green D+ core and white D-core inside.
The bare wire core is used for power transmission at the negative electrode, and there is a tensile wire inside.
Close-up of the cable's inner filler with tensile wire.
A list of all dismantling and a family photo.
The length of the green time capsule fast charging cable is 15 meters, the wire body is made of food-grade silicone material, and the two ends of the cable are made of hard plastic shell, which is dirty and stain-resistant, beautiful and durable. The data cable supports 100W fast charging and USB20 data transfer, suitable for laptop, mobile phone and power bank fast charging use.
Through the dismantling of the charging head network, it was learned that the USB-C terminal of the USB-C data line of Greenlink is filled by injection molding, the internal plug is spot welded with stainless steel shell, and the terminal plate is filled with hard rubber between the metal shell to increase the mechanical strength. The inside of the cable is made of thickened wire, USB20 The data cable is equipped with shielded aluminum foil, and the cable is filled with tensile wire to increase strength. The E-Marker chip comes from Hynetek, model HUSB332A. The overall workmanship of the cable is solid, reliable and durable.