CO2 sensor calibration chamber

Mondo Science Updated on 2024-02-01

Edit |Circumferential instruments

The carbon dioxide sensor should be tested in the production process to determine whether the carbon dioxide sensor is qualified, and the carbon dioxide sensor will be judged to be qualified if the test is successful. During the entire inspection process, a CO2 sensor calibration chamber is used.

Technical Parameters:

Calibration requirements:

The sensor should have the function of remote control adjustment within a distance of not less than 6 m and an angle of 60°.

In (0 500%)CO2 range, when the carbon dioxide concentration remains constant, the change in the display value or output signal value (converted to carbon dioxide concentration value) of the sensor should not exceed 004%co2。

Principle of judgment:

The calibration and detection of the carbon dioxide sensor, when the calibration and detection meet the requirements, the carbon oxide sensor is judged to be qualified, compared with the traditional mode of first detection and then calibration detection, and the application in improving the practical application, can avoid the first successful detection of the carbon dioxide sensor because it does not affect the flow, reliability and accuracy of carbon dioxide detection and directly judge qualified.

If you have any questions about the selection of the carbon dioxide sensor calibration chamber, you can visit the official website of "Huanyi Instrument" and consult relevant technical personnel.

Related Pages