With the advent of the intelligent era, as a new type of security management equipment, the card access control all-in-one machine has been widely used in various places, such as office buildings, residential quarters, hotels, etc. It not only improves the level of safety precautions, but also brings convenience to people's lives and work. This article will introduce the installation steps and precautions of the card access control all-in-one machine in detail.
1. Determine the installation location.
Before installing the card access control machine, you need to determine the installation location. Generally speaking, the card access control machine is installed on the inside of the door, facing the door, and the height is 12-1.5 meters is advisable. The installation location should be as far away as possible from the source of magnetic field interference, such as elevators, wires, etc. At the same time, it is necessary to ensure that there is enough space on the front panel of the card access control machine to facilitate the user to swipe the card and operate.
2. Install the fixing frame.
The card access control machine needs to be installed on a fixed frame. According to the size and thickness of the door, choose a suitable fixing frame and fix it on the door frame. Make sure the mount is horizontal and vertical to avoid tilting or shaking of the card access machine.
3. Wiring. The card access control machine needs to be connected to the power and signal cables. According to the requirements of the product manual, connect the power cable and signal cable to the corresponding ports respectively. Pay attention to the positive and negative poles of the power cord, and do not connect them in reverse. The signal line generally adopts serial port communication mode, which needs to be cross-connected. After connecting the wire, you should check whether the line is firm to prevent it from loosening or falling off.
Fourth, debugging. After the wiring is completed, it needs to be commissioned. First, check whether the power supply of the card access control machine is normal, and then use the administrator privileges to set up the system. Set the opening time and permission level of access control according to actual needs. Once you're done setting it up, do a swipe test to make sure the access control is working properly. If there is a problem, check whether the wiring is correct, whether the settings are reasonable, etc., and adjust accordingly.
5. Precautions.
When installing and using the card access control all-in-one machine, you need to pay attention to the following points:
1.Comply with relevant laws, regulations and safety specifications to ensure that installation and use are legal and compliant.
2.Appropriate materials and tools should be selected during installation to avoid damage to doors and other facilities.
3.When installing, you should follow the requirements of the manual and follow the steps to avoid safety accidents.
4.When using, the card access control machine should be regularly inspected and maintained to ensure its normal operation.
5.Pay attention to protecting personal information and privacy, and avoid leaking sensitive information.
In short, the installation and use of the card access control all-in-one machine needs to be taken seriously to ensure that it operates safely, stably and reliably. At the same time, it is also necessary to pay attention to comply with relevant laws, regulations and security norms to protect the security and privacy of personal information.