When you encounter the problem that the newly installed radiator is not hot, you don't have to worry about the quality problem in the first place. The design of the regular production of radiators has fully considered the needs of heat dissipation, as long as the production is up to standard, the heat dissipation is sufficient. So, if the radiator at home is not hot, you first need to check some common reasons. Let's follow the golden flagship flag brother to find out.
1.What we have to consider is whether the water pressure is sufficient. Insufficient water pressure is one of the important factors affecting the heat dissipation of radiators. Therefore, at the beginning of heating, it is best to check the water pressure in your home first to make sure that the water pressure is sufficient. If the water pressure is insufficient, the heating company or property can be contacted for pressurization treatment.
2.It is also necessary to pay attention to whether the radiator is turned on correctly. Some users may mistakenly think that radiators are transmitted by temperature, but in fact, radiators are transmitted by heat. Therefore, when turning on the radiator, you need to make sure that the inlet and return valves of the radiator are open so that the hot water can circulate in the radiator.
In addition, the location of the radiator will also affect its heat dissipation effect. If the radiator is installed in the corner of the wall or against the wall, it may cause heat loss and affect the heat dissipation effect. Therefore, when installing radiators, you should choose a well-ventilated location away from the corner of the wall for better heat dissipation.
3.Consider whether the radiator valve needs to be vented.
Because the radiator system is in a newly installed state, after opening the operation, there is a large amount of gas inside the radiator and inside the pipe, the system is opened, after the cycle operation begins, the pressure will gradually increase, the gas density is small, it will be pushed to the upper end of the radiator, with the gradual accumulation, the radiator forms a "gas blockage", which seriously hinders the normal flow and circulation of heating water in it, and it is difficult to heat or even not heat.
Method: Make sure that the inlet and return valves of the radiator are open, slowly twist the air release valve at the side end of the radiator, and hear that the gas is squeezed and discharged. It should be noted that if the valve is unscrewed hard, you must quickly block the interface and contact a professional master for on-site maintenance.
4.Consider whether the radiator pipes are congested.
The construction and installation of radiators and pipes need to be in direct contact with the ground, if it is concealed, it is necessary to slot, wall punching, etc., in the process of construction, there will inevitably be dust and impurities inside the radiator system, and if there are too many of these substances, it will block the hot water circulation of the radiator, and it will not be hot.
Method: After the pressure test is completed, the concealed radiator system is flushed with the previous system to clean the impurities from the system and keep the circulation in the pipe smooth. Note that it is safer not to operate by yourself, and it is safer to contact HVAC technicians for door-to-door cleaning.
If there are no problems with the above troubleshooting, then there may be other more complex reasons that cause the radiator not to heat up. For example, it could be a problem with clogged pipes in the heating system, the presence of gases or impurities. In this case, it is recommended to contact a professional heating company or maintenance personnel for repair and treatment.
In short, for the problem that the newly installed radiator is not hot, don't panic first, and start with some common reasons. If the problem persists, you can contact a professional maintenance personnel to deal with it. At the same time, it is also necessary to pay attention to the maintenance and maintenance of the heating system to ensure the normal operation and heat dissipation effect of the heating system.
In order to ensure the proper operation and prolongation of the service life of the heating system, it is recommended to carry out regular maintenance and maintenance of the heating system. For example, regularly check the heat dissipation of radiators, clean heating pipes, clean filters, etc. These simple maintenance measures can effectively prevent and reduce the probability of problems in the heating system, and improve the heating effect and service life.
In addition, in order to make better use of radiators for heating, some energy-saving measures can be taken. For example, adjust the temperature of the radiator reasonably and avoid opening and closing doors and windows frequently. These measures can effectively reduce energy consumption and save energy, while also extending the service life of the heating system.
In short, although the problem of the newly installed radiator not heating may involve a variety of reasons, it can generally be solved by troubleshooting common causes and professional maintenance treatment. At the same time, pay attention to the maintenance and maintenance of the heating system and take energy-saving measures, which can also make better use of radiators for heating and improve the heating effect and service life.
Disclaimer: Part of the text, ** and other content of the article include but are not limited to the above mentioned ** on the Internet, if there is any infringement, please contact to delete, the copyright belongs to the original author.
The above is the summary of the golden flagship aesthetic radiator "The new heating is not hot, how to solve it?" I hope it can help everyone's life. If you want to know more about HVAC information, please pay more attention to the golden flagship, and the golden flagship will provide you with more complete, more detailed and updated information. If there are any deficiencies, please correct and put forward.