Electromagnetic self-loading iron remover RCD series permanent magnet self-loading iron remover, electromagnetic self-loading iron remover professional manufacturer reminds you of the precautions for use 1, after the electromagnetic self-loading iron remover is connected to the power supply, the excitation system produces a strong magnetic field, when the bulk material on the conveyor passes below the iron remover, the ferromagnetic debris mixed in the material is sucked up under the action of the magnetic field force, and is continuously thrown out by the running iron unloading belt, when the material is out of the range of the magnetic field, the ferromagnetic debris falls into the iron collection box under the action of gravity.
2. The control cabinet should be placed in a place with less dust, dry, no rain and snow invasion, good ventilation and easy to operate and observe;
3. Before use, check whether the electrical components, connecting wires and fasteners are loose or damaged due to long-distance transportation, and the wiring should correctly distinguish between the output and the input end;
4. The control cabinet of the electromagnetic iron remover should be dusted at least once a quarter, and check whether the electrical contacts are loose, and repair the problems in time;
5. If the silicon rectifier diode is damaged, the diode of the same type should be replaced, but it should be noted whether the symbol "" on the diode is the same as the original one, otherwise it cannot be replaced;
6. If the fuse used in the control cabinet is damaged, the cause should be rated according to the schematic diagram after finding out the cause.