As more and more family members have recently begun to pay attention to the construction steps and key points of the 15mm mezzanine floor slab, this article is about its relevant information, hurry up and save it for collection.
15mm mezzanine floor slab is a commonly used building material, which has the characteristics of wear resistance, waterproof, fire prevention and so on. The following is a brief introduction to the construction steps and key points of the 15mm mezzanine floor slab:
1. Preparation: Confirm the construction area, and clean the ground to ensure that the ground is flat, dry and dust-free. Inspect the ground for cracks or unevenness.
2.Set the reference line: According to the design requirements, use a spirit level or other tools to determine the horizontal reference line at the four corners of the construction area. Guides can be fixed with sticks or strings to ensure levelness.
3.Build a support frame: On the basis of the reference line, build a suitable support frame according to the design requirements. The support frame can be made of wooden strips or metal brackets to ensure that the shelf is stable and secure.
4.Install the mezzanine floor slabs: Install the 15mm mezzanine floor slabs sequentially from one side. Before installation, the floor slab should be left on the construction site for at least 48 hours to acclimatize to the ambient temperature and humidity. Apply glue to the edges of the floor slabs and then embed the slabs into the support frames, making sure the slabs are parallel to the reference lines.
5.Fix the floor slabs: Use screws or steel nails to fix the floor slabs to the support frame. Make sure the nails are firmly penetrating the floor slabs and supports and are properly spaced.
6.Drainage design: According to the requirements of the building design, set up a reasonable drainage system. Proper slotting is made in the floor slab to ensure smooth drainage.
7.Inspection and correction: After the construction is completed, the quality of the mezzanine floor slab is carefully checked. Look for looseness, cracking, or other blemishes. If there is a problem, repair or replace it in time.
The above is a brief introduction to the construction steps and key points of the 15mm mezzanine floor slab. In the process of construction and construction, it is necessary to ensure the flatness and dryness of the construction area, and carry out reasonable construction and fixation in accordance with the design requirements. At the same time, quality inspection should be carried out to ensure the quality of construction.