Vibratory fluidized bed cyclone separators and manual bag filter dischargers are a common technical problem, and the main causes may include loose valves, air leakage, and sticky material on the discharger wall. The occurrence of these problems often affects the normal operation of equipment and the continuity of production, so it is necessary to take timely measures to solve them.
First of all, loose valves and air leaks can be caused by long-term use or improper maintenance. In this case, it can be solved by taking measures to adjust the valve clearance. The specific operation methods include cleaning the impurities inside the valve, adjusting the opening of the valve, etc., to ensure that the valve is closed tightly and there is no air leakage.
Secondly, the stickiness on the discharger wall may be caused by the nature of the material, temperature, humidity and other factors. In this case, it can be solved by tapping the casing with a wooden stick. The specific operation method is to gently tap the shell of the discharger with a wooden stick to vibrate the sticky material or blockage inside, so that it loosens and discharges.
Finally, if the number of discharges in the discharger is too low, it may cause material to accumulate in the discharger, which in turn will lead to the phenomenon of discharge. In this case, measures can be taken to increase the number of discharges to solve the problem. The specific operation methods include adjusting the discharge time of the discharger, increasing the number of discharges, etc., to maintain the smoothness of the discharger and the continuity of material flow.
In addition to the above measures, in order to prevent the recurrence of similar problems, it is also necessary to strengthen the daily maintenance and maintenance of the equipment. Specifically, it includes regularly checking the operation of the discharger, cleaning up the impurities inside the discharger, adjusting the valve clearance, etc., to ensure the normal operation of the equipment and the stable progress of production.
To sum up, in view of the problem of non-discharge of vibrating fluidized bed cyclone separator and manual bag filter discharger, measures such as adjusting the valve clearance, tapping the shell with a wooden stick, and increasing the number of discharges can be taken to solve it. At the same time, strengthening the daily maintenance and maintenance of equipment is also an important measure to prevent the recurrence of similar problems. Through the implementation of these measures, we can better ensure the long-term stable operation of equipment and improve the production efficiency and market competitiveness of enterprises.