Hello friends, I am a w optimization master who loves to share computer knowledge Next, don't forget to like, collect and follow w optimization master, the c disk is full, computer optimization, just find w optimization master!
When 360 browser fails to open a web page, it can be due to a number of reasons. Here are some steps to solve this problem::
1.Check your network connection
Make sure your device is connected to the internet. Try using a different device to connect to the same network to see if you can get online.
Try opening a different web page or accessing the same ** using another browser to determine if the issue is specific to the 360 browser or a certain **.
2.Clear your browser cache and cookies
Corrupted cookies or cookies may cause web pages to fail to load. Find the option to clear browsing data in the 360 browser settings and select Clear cache and cookies.
3.Disable browser extensions
Some browser extensions may not be compatible with web pages. Try disabling all extensions in the 360 browser and then re-enabling them one by one to find out which ones might be causing the problem.
4.Check for fire protectionwall and security software settings.
Firewalls or security software may prevent 360 browsers from accessing the internet. Check the settings of these software to make sure they are not blocking browsers.
5.Reset your browser settings
Some custom settings may cause the browser to not work properly. Look for the reset option in the settings of the 360 browser to restore the browser to its original state.
6.Update your browser
Using outdated browser versions may experience compatibility issues. Check if there is an update available for the 360 browser and update it.
7.Restart your computer
Sometimes a simple restart of your computer can solve many problems.
8.Check the system date and time
If your system's date and time settings are incorrect, it may affect your browser's load security**. Make sure your system date and time are set correctly.
9.Use the command prompt to refresh the DNS and reset the network settings
Open a command prompt (as an administrator) and run the following commands:
ipconfig flushdns
netsh winsock reset
netsh int ip reset (reset IP settings).
After that, restart your computer.
If none of the above steps resolve the issue, further technical support may be required. Consider contacting 360 Browser customer service or asking for help on the relevant forums.