In the first month of 2024, many factories have launched their latest products, which has a certain reference significance for the product trends in the following year. As the saying goes, "a good start is half the battle", and the new products in the factory in January 2024 are destined to be important. The charging head network summarizes the new fast charging products of each source factory in January below, so that you can quickly understand. The following are listed in no particular order, in alphabetical order of the factory. AlrightPower AuletAulet's new national standard 90w electric bicycle chargerThe charger adopts a relatively square rectangular design, and the micro-arc transition between the surfaces is not easy to handle when holding and placing it. 
The charger uses dark black in the color scheme, and the surface is matte, which has a relatively calm appearance and is very resistant to dirt and durability. There are a lot of strip textures on the front, which enhances the texture of the charger and does not look monotonous. The charger has a long charging indicator, a red light indicates charging, a green light indicates that it is full or not connected, and when the red light flashes it indicates a charging error. 
There is a white product information plate on the underside. The battery charger model is AP-FN90CH04200020, the input specification is 100-240V 50 60Hz 2A, and the output power is 42V 2A 84W. The charger has passed a number of domestic and foreign safety certifications such as ETL, CE, FCC, CQC, etc., and is also exported overseas. Please read the instructions before using the charger, the charger only supports lithium-ion battery charging, use it in an indoor dry environment, be careful of electric shock. There are bump points at the four corners, which play a certain role in buffering and protecting the charger when it is placed, and the contact area of the charger becomes smaller when charging, and the heat dissipation is better. The plug specification is the new national standard standard for electric bicycles, and the form of two power pins and four communication pins (2+4) is designed for charging lithium-ion batteries, which is a bit like a "Tetris" shape. The positive electrode marked with the "+" symbol is located in an independent cavity in the upper left corner, and the negative electrode and the four communication pins are also placed in a large cavity, which eliminates potential safety hazards due to mismatch and greatly improves safety. Related reading 1, Aulet 90w electric bicycle charger, the new national standard plug eliminates potential safety hazardsAulet's new national standard 120w electric bike chargerThe charger uses a classic jet black color scheme, and the surface is matte to give it a first-class texture, which is very resistant to dirt and durable. The charger is a square brick shape, and the side edge is slightly curved and transitioned, and the style is tough but not awkward. 
The front of the charger has a strip brushed texture design, which gets rid of monotony and improves the texture of the charger. There is a charging indicator in the upper right corner of the charger, the red light is solid to indicate charging, the green light is always on to indicate that it is full or not connected, and when the red light flashes, it marks a charging error. 
There is a white nameplate on the underside of the charger with product-related information printed on it. The battery charger model is AP-PN120CH05460020, and the power input specification is 100-240V 50 60Hz 25A, the output power is 546v 2a 109.2w。The charger has passed CCC*** certification, and has also passed the German Rheinland GS certification. Please read the instructions before using the charger, the charger only supports lithium-ion battery charging, use it in an indoor dry environment, be careful of electric shock. There are bumps at the four corners of the bottom surface, which plays a certain role in buffering and protecting the charger when it is placed, and the contact area of the charger becomes smaller when charging, which is more conducive to heat dissipation during charging. The plug specification is the new national standard standard for electric bicycles, and the form of two power pins and four communication pins (2+4) is designed for charging lithium-ion batteries, which is a bit like a "Tetris" shape. The positive pole marked with the "+" symbol is located in an independent cavity in the lower right corner, and the negative electrode and the four communication pins are also placed in a large cavity, which eliminates potential safety hazards due to mismatch and greatly improves safety. Related reading 1, Aolet new national standard 120W electric bicycle charger, through ETL, CE, FCC, CQC and other safety certificationsAohai OkumiOlympian qi20 MPP ultra-thin magnetic wireless charging moduleOlympian Technology QI2The 0 MPP wireless charging module uses a shiny metal design, and the copper of the induction coil of the wireless charging module is also full of texture details, which makes people feel exquisite at a glance. 
Olympian wireless charging module is the only magnetic wireless charging mold that can be selected at the same time to weld wires and power strips, screws or not, can be selected, to provide customers with a variety of choices; And through technical treatment, the problem that the user welding is easy to short circuit is solved. 
With Olympian's unique heat dissipation technology, it can carry out super heat dissipation and achieve the lowest temperature in the industry; The thickness is also much thinner than that of its peers, and the shell cover is 10mm, the charging efficiency is higher, and you can also choose whether to add leather to customize the magnetic suction to bring users an exclusive fast charging experience. Related reading1、Olympian Technology's new products are coming, leading the opening of qi20 wireless charging home factory launched 7 new QI2 wireless charging productsbesdaBeishida 20W dual-port European standard chargerThe 20W charger is a classic simple white, which is very versatile. The appearance is simple and atmospheric, and the whole is very delicate and beautiful. 
The charger is equipped with 1 x USB-A and 1 x USB-C, using European prongs and 20W Max printed on the front. The 20W Max logo is a silver gray color scheme, which looks low-key and restrained. The USB-A port and USB-C port cores on the output are orange and red, which is very eye-catching. 
The bottom of the charger is printed with information about the product parameters. The charger model is AD26, and the power input specification is 100V-240V 50 60Hz 05A (MAX), USB-A single port output power is 18W, USB-C single port output power is 20W, and the maximum total power is 20W when both ports are output at the same time. The input is a European pin, which is very friendly for users traveling to Europe for business trips. Related reading 1, Beishida 20W dual-port European specification charger, supporting iPhone15 series fast charging experienceHuazhong TechnologyHuazhong Technology 65W Dual USB-C GaN Charger HZ-LP008Huazhong Technology's 65W dual USB-C GaN charger adopts a biscuit-like shape, with side transitions as smooth as pebbles. 
The charger uses a white simple design as a whole, and the surface is frosted and anti-fingerprint treatment, with a first-class overall texture, simple and versatile. There should be silver-gray GAN 65W lettering in the upper right corner of the front of the fuselage, and the words will be more dazzling when the light shines. The front is also designed with a glossy black sticker that resembles a capsule, printed with the "MGC" logo, and the edges are chamfered with a matte finish. 
The back of the charger is printed with detailed product parameters, manufacturer and safety certifications and other relevant information. The model of the charger is HZ-LP008, and the power input specification is 100-240V 50 60Hz 15A, USB-C1 C2 supports up to 65W super fast charging, and is backward compatible with low power, supports PPS charging protocol, C1+C2 has three power distributions at the same time, which are 45W+20W or 20W+45W or 30W+30W, the product has passed CE, FCC certification, the charger manufacturer is Shenzhen Huazhong Science and Technology*** The charger is equipped with foldable American plugs, which saves space and volume when storing, and is more convenient to use when traveling to the United States. Related reading 1, high-power and high-value fast charging partner, Huazhong Technology 65W dual USB-C gallium nitride charger HZ-LP008Ly, happy to use the timesHappy to use the era mini 225w chargerThe Leyong Times Mini 20W charger is designed with a classic cube shape and is very compact. The fuselage is made of PC fireproof material white shell, and there is no special design for the waist and top surface, and the style is simple.
The charger is equipped with foldable prongs and is very portable with a compact body. The top surface is equipped with a single USB-C port, which is arranged on one side of the edge. It is measured that the USB-C port supports FCP, SCP, AFC, QC3+, and PD30. DCP charging protocol. PDO packets show that the USB-C port also has 5V3A and 9V222a、12v1.67A with three sets of fixed voltage levels.
The input shell is printed with the charger parameter model: FC468C input: 100-240V 50 60Hz 06A output: 5V3A, 9V222a、10v2.25a、12v1.66a 22.5W MAX Manufacturer: Shenzhen Leyong Times Technology *** charger has passed CCC certification. Related reading 1, teardown report: Leyong Times Mini 225W fast charging chargerPeter PowerPeter Zhizhi made QI2 MPP 15W magnetic wireless charging padPeter Zhizhi made 15W magnetic wireless charging pad with a dark night black design, a classic round shape, and a frosted surface material, no fingerprints, and outstanding texture. The magnetic wireless charging pad is an excellent choice for iPhone15 series charging, with a light sticker on the call, it can be charged quickly when it is sucked steadily, and it can't be shaken off, and it is thin and unburdened. 360° rotation during charging, horizontal and vertical charging are convenient.
The wireless charging pad of Peter Intelligent Manufacturing uses a QI2 MPP module, which supports Qi standard reception 5W and Apple magnetic suction 15W. The input power is 5V 3A, 9V 222A with a maximum output of 15W. It can pass QI2 MPP certification and US FCC security certification, which is fast charging and safe and secure. Peter Zhizhi made QI2 MPP 2-in-1 magnetic wireless chargerPeter's intelligent two-in-one magnetic wireless charger has fine workmanship and first-class appearance. Using 2-in-1 technology, the mobile phone earphones are charged together, and the power of the Qi wireless charger is intelligently matched. The charger has strong adsorption, magnetic suction and simultaneous charging, which lives up to the comfortable time, and the charging panel has its own heat dissipation holes for strong heat dissipation.
The 2-in-1 magnetic wireless charger uses an MPP module, which supports receiving Qi standard 5W, Apple magnetic 15W, the maximum output power of the charging pad is 15W, and the bottom supports up to 5W output, which can be charged with AirPods. The input specifications are 5V 3A, 9V 3A, with a 1m C to C data cable, saving the trouble of self-purchased cables. It can pass QI2 MPP certification and US FCC safety certification.
The 2-in-1 magnetic wireless charger says goodbye to wired constraints and makes the desktop tidier. Magnetic stand, multi-angle adjustment, experience a comfortable viewing angle. Switch horizontally and vertically at will, brush short**, long** chase dramas are convenient. Special counterweight design, stable center of gravity, easy to hold. Peter Zhizhi made QI2 MPP 3-in-1 magnetic wireless chargerThe 3-in-1 magnetic wireless charger made by Peter is processed by a variety of processes, showing an extraordinary high-end texture, starting from the appearance and being loyal to the function. Three-in-one wireless fast charging for mobile phones, watches, and headphones, intelligently matching Qi wireless power, saying goodbye to wired constraints, making the desktop more tidy, and charging one is enough. The charger has a strong magnetic suction, which is not easy to fall off, multi-angle adjustment, and the information is clear at a glance, so there is no need to pick up the mobile phone. It is easy to place it horizontally and vertically, and you can brush it as you like, and you can learn to chase dramas. The charging area of the watch is adjustable at 90°, and both the detachable strap watch and the non-detachable watch can be charged.
The charger uses a wireless charging module certified by QI2 MPP+BPP, and supports Qi standard 5W wireless charging and Apple Magnetic 15W wireless fast charging. The input supports 5V 3A, 9V 3A, 12V 3A, iPhone supports up to 15W wireless charging, iWatch supports up to 5W wireless charging, AirPods earphones support up to 5W wireless charging, 25W total output. The charger comes with a 1-meter C to C data cable, which is more convenient to use and can also pass the US FCC safety certification. Related reading 1, Peter Power made three QI2 MPP wireless chargers, supported Apple's 15W magnetic wireless fast charger home factory launched 7 new QI2 wireless charging productsPeter Zhizhi made QI2 MPP 5000mAh wireless power bankThe 5000mAh magnetic wireless power bank made by Peter uses the color of Chenye Black, and the surface is treated by a variety of processes, with excellent texture. The back comes with a folding bracket to free your hands, and the inside is twilled to increase friction and make it more stable when supporting. Playing while charging, or a mobile phone holder, it is not wrong to charge while chasing dramas. The power bank is small in size, portable and does not block the lens, and can also be charged when taking pictures.
The input power of the power bank through the USB-C interface is 5V 3A, 9V 222A, C port wired output 5V 3A, 9V 222a、12v 1.67A Max, wireless charging output power up to 15W. The magnetic attraction is strong, and it can be charged as soon as you put it in your hand, and you can replenish it at any time when you go out. 5000mAh capacity, rest assured charging, there is a button to control the output switch. The power bank has 4 LED lights, one LED is on when charging wirelessly, and 3 LEDs indicate the percentage of battery power. Peter Zhizhi made QI2 MPP 10000mAh wireless power bankPeter's 10000mAh magnetic wireless power bank uses the color of Chenye Black, and the surface is frosted, which is not easy to stain fingerprints, and the appearance is first-class. The power bank comes with a bracket, and the bracket surface has a special twill treatment to increase friction to make it more stable when supporting. The power bank becomes a mobile phone holder in seconds, free your hands, charge while playing, horizontal and vertical multi-angle usable, brush ** and chase dramas. The power bank is small in size, does not block the lens, and the finger buckle is very handy, and it is not tired to hold it for a long time, and it is easy to take pictures.
The power bank input power through the USB-C interface is 20W, the wired output of the USB-C interface is 20W Max, and the output power of wireless charging supports up to 15W. 10000mAh large capacity, can charge the iPhone 2 times, and there are buttons to control the output switch. Power bank LED light, wireless charging reminder, but also display the remaining battery power. Related reading 1, Peter Power made Qi2 MPP wireless power bank, 5000mAh and 10000mAh two optional home factory launched 7 new QI2 wireless charging productsPeter Zhizhi made QI2 15W magnetic wireless car fast charging bracketThe 15W magnetic wireless car fast charging bracket made by Peter is made of classic graphite black color, and the surface has been treated by multiple processes, with first-class texture and outstanding appearance. It comes with a built-in air outlet for heat dissipation, and the charging efficiency is higher. The strong tail clip design inserts into the car air outlet for easy installation, and the soft contact protects the air outlet without leaving scratches. Strong magnetic suction to cope with diverse road conditions, bumps on the road are still stable and do not fall off.
The magnetic charging car holder wireless charging pad adopts MPP module, 360° rotation, magnetic alignment, and fast charging. The large panel design increases the contact area, and it is easier and more convenient to pick and place with one hand. Support Qi standard 5W charging, support Apple magnetic 15W fast charging, rapid blood recovery, driving navigation, charging at the same time. Multi-device compatible, no need to plug in the cable, no need to remove the shell. The power input specifications are 5V 3A and 9V 222A, the output power supports up to 15W, and can pass the US FCC certification. Related reading 1, Peter Zhizhi made a 15W magnetic wireless car fast charging bracket, and 7 new Qi2 wireless charging products can be launched through the QI2 MPP certified home factoryseepow orange fruitOrange Fruit 20W USB-C Fast ChargerThe appearance of the orange fruit 20w fast charging charger is a classic straight plate design, the waist and top surface are integrated fireproof material white shell, and the waist is high and glossy.
The charger is equipped with fixed national standard pins. The output is equipped with a single USB-C port and is arranged in the center. The measured charger supports FCP, SCP, AFC, QC30/4+、pd3.0、pps、dcp、apple 2.4A charging protocol. PDO packets are available in 5v3a and 9v222a、12v1.67A with three fixed voltage ranges, and 33-11v2.2A set of pps voltage levels.
The housing of the input terminal is gray and printed with the detailed parameters of the charger. Model: C29C-020-00CN Input: 100-240V 50 60Hz 05A output: 5V3A, 9V222a、12v1.67A Total Output: 20W MAX Manufacturer: Shenzhen Orange Fruit Electronics *** The charger has passed CCC certification and Class VI energy efficiency certification. Related reading 1, teardown report: Orange fruit 20W USB-C fast charging chargerOrange Fruit 30W USB-C GaN Fast ChargerOrange Fruit's 30W gallium nitride charger is designed to be relatively compact, the body is made of PC fireproof material white shell, the surface piano paint process is very smooth, and the waist and top edge are rounded, so users are not awkward when plugging and unplugging.
In addition, the charger is equipped with foldable national standard pins, with a compact body, which is very convenient to carry out. The top surface is equipped with a single USB-C port, which is arranged on one side of the edge. It is measured that the USB-C port supports FCP, SCP, AFC, QC30/4+、sfcp、pd3.0、pps、dcp、sam 2a、apple 2.4A charging protocol. PDO packets show that 5V3A, 9V3A, and 12V2 are also available5a、15v2a、20v1.5A five sets of fixed voltage levels, and 33-11V3A set of PPS voltage ranges.
The bottom shell is printed with the charger parameter information Model: C81-030-CN Input: 100-240V 50 60Hz 08A output: 5V3A, 9V3A, 12V25a、15v2a、20v1.5A Total Output: 30W Max Manufacturer: Shenzhen Orange Fruit Electronics *** The charger has passed CCC certification. Related reading 1, teardown report: Orange fruit 30W USB-C GALLIUM NITRIDE FAST CHARGING CHARGEROrange fruit electron pd31 300W GaN Multiport Desktop Charger C56The Orange Fruit 300W GaN charger is made of matte PC material, which is not easy to retain fingerprints, and the overall black and deep color matching style is subtle, and its side edges are slightly curved and transitioned, which is a bit similar to Apple's Mac mini, which is very versatile on the desktop.
The output panel of the Orange Fruit 300W charger is equipped with 5 USB-C ports and 1 USB-A port, which can quickly charge 6 devices at the same time. The charger is PD31. High-power fast charging products, the power input interface is the national standard 3-hole plum blossom port, the interface details are excellent, and it is durable.
The charger has a base to match, which is more stable, more non-slip and more convenient on the desktop when used. With the base charger on the table as an ornament, there will be no sense of disobedience. The charger not only has a strong output power, but also supports automatic power distribution, which can be quickly charged when multiple devices are connected at the same time, solving the problem of desktop charging. In addition, it is accompanied by a 1The 5-meter long USB-C charging cable saves users the trouble of purchasing by themselves. An orange fruit electron pd3The 1 300W GaN charger can meet a variety of scenarios for desktop charging. The Orange Fruit 300W charger model is C56 Gan 300W, the charging adaptation is 100-240V full voltage and 50 60Hz current frequency, and the maximum support is 3A current, which is applicable at home and abroad. When the output is single-port, the USB-C1 C2 interface supports up to PD31 140W charging, when multi-port output, the total power can reach up to 300W, which can meet the fast charging needs of six devices. The charger has also passed CCC ETL FCC Level VI multiple safety certifications, and is compatible with a variety of public protocols such as PD, QC, PPS, as well as private protocols from Apple, Samsung, and Huawei, and most devices on the market can provide a good charging experience. The charger has a quadruple protection mechanism of over-current protection, over-voltage protection, over-temperature protection, and short-circuit protection, making charging more secure. Related reading: 1. Orange fruit electronics PD31 300W GaN Multiport Desktop Charger C56, ultra-high power desktop artifactShounuo Shounuo NordsonSonova 65W Car Fast Charging SN-607ACThe Shounuoxin 65W car charger adopts a dark night black color, the surface of the material is frosted, and there will be a metallic luster on the light illumination, the transition curve is natural, the overall texture is first-class, and the appearance is outstanding.
Sounason's car charger is equipped with 1 USB-A port and 1 USB-C port, and the dual USB interface design can meet the needs of two electronic devices to charge at the same time without waiting. The bi-metal elastic contact design on both sides is compatible with the mainstream cigarette lighter and is more stable to insert. The orange rubber core of the USB-A port is more eye-catching, which is convenient for the USB-A cable to be inserted in the correct direction, and the USB-C port has a light strip design, which is very cool, and it is easier to find the interface when used at night in dark light, which is convenient for cable plugging and unplugging.
The model of Sonuoson 65W car charger is SN-607AC, and the product size is only 23*23*443mm, very small size, it will not take up too much space when it is placed in the car for charging. The power input specification is DC 12-24V 60A, USB-A charging output supports 18W, USB-C output up to 65W fast charging, also supports PPS charging protocol, when the dual ports output at the same time, the maximum power is 65W, the charging power density is very high, and the power is stable, can continue to high power output, excellent experience. Related reading 1, Shounuoxin 65W car fast charging SN-607AC, first-class texture, outstanding appearancetinin TianyinTinin Tianyin 280W desktop Rubik's Cube eight-port gallium nitride chargerThe Tianyin 280W desktop gallium nitride charger adopts a Rubik's Cube shape, which is very square, and has a total of three colors, namely white, black, and red. The fuselage is printed with the words "280W GAN" in white, with 4 USB-A ports and 4 USB-C ports, a total of 8 USB ports, and the application scenarios are quite rich.
There are two indicators above the USB interface of the charger, which will light up to remind you when charging, and when the USB-C single port output, it can reach up to 140W super fast charging level, and the charger can support 8 devices to charge at the same time, with a total output of up to 280W, which can be said to be able to easily cope with desktop charging scenarios. Tianyin 280W desktop Rubik's Cube GaN charger has passed UL, ETL, FCC, RCM, KC, CE, CB, PSE, ROHS, CCC and other safety certifications, which is safe and reliable. In addition to domestic and foreign sales, it can also be sold in the United States, Canada, the European Union, Australia, New Zealand, South Korea, Japan and other countries and regions. Related reading 1, Tinin Tianyin 280W desktop Rubik's Cube eight-port gallium nitride charger, high-power multi-interface desktop charging partnerTinin Tianyin 420W desktop 12-port GaN chargerTianyin 420W desktop gallium nitride charger adopts a cube shape, very square, natural transition around, a total of three colors, namely black, red, white, the upper part of the fuselage is printed with the words "420W GAN", there are three indicators above the USB interface, and the reminder is lit up when charging.
The product model of the charger is TPD-526 420W, and the product size is 99*75*70mm, and the volume control is quite good. It has 6 USB-A ports and 6 USB-C ports, a total of 12 USB ports, of which when USB-C is output in a single port, it supports up to 140W super fast charging, can support 12 devices to charge at the same time, and has a total output of up to 420W. Tianyin 420W desktop gallium nitride charger has passed UL, ETL, FCC, RCM, KC, CE, CB, PSE, ROHS, CCC and other safety certifications. In addition to domestic and foreign use, it can also be used in the United States, Canada, Europe, and other regions. Related reading 1, tinin Tianyin 420w desktop 12-port gallium nitride charger, ultra-high power ultra-multi-interface desktop artifactVina MeifudaMefida 65W 2C1A GaN Fast ChargerThe charger adopts a white shell made of PC fireproof material, and there is no special design on all sides of the fuselage, which is convenient for customers to carry out differentiated customization.
The output terminal is equipped with three USB fast charging ports of the mainstream 2C1A, which can supply power to three devices at the same time, and the charging does not wait. The USB-C1 port supports FCP, SCP, AFC, and QC30/4+、sfcp、pe2.0、pd3.0、pps、dcp、sam 2a、apple 2.4A charging protocol. And with 5V3A, 9V3A, 12V3A, 15V3A, 20V325A five sets of fixed voltage ranges, and 33-11V5A set of PPS voltage ranges. The USB-C2 port is compatible with the same protocol as the USB-C1 port. The USB-A port supports FCP, SCP, AFC, QC30、sfcp、pe2.0、dcp、sam 2a、apple 2.4A charging protocol.
The input terminal is equipped with foldable US prongs for easy portability. The waist of the charger and the edge of the housing of the input terminal are frosted and shiny respectively. Related reading 1, teardown report: Mefuda 65W 2C1A gallium nitride fast charging chargerWLX Wan Long XinWan Long Xin 20-port USB-C multi-function 400W smart chargerWan Longxin's 20-port USB-C multi-function 400W smart charger uses dark black color matching all over the body, with a total of 20 USB-C output ports, which are symmetrically distributed on both sides, and can charge 20 devices at the same time, which is very powerful.
The 20 USB-C port cores are orange, which is more eye-catching, and the number PD1-20 is marked below the interface, which supports 20W charging. The charger has a white product name printed on the middle, two heat dissipation holes underneath, and the PD20-PORT logo. The 20-port PD charger solves the charging trouble, and supports iPhone15 to charge to 60% in 30 minutes, and the charging speed is quite fast.
Wanlongxin 20-port USB smart charger related parameters: product model: PD 20; Input: AC100-240V 50 60Hz; PD output: 5V 3A 9V 222a/12v 1.67a;Total power: 400W (max). Related reading 1, Wan Longxin 20-port USB-C multi-function 400W smart charger, which can charge 20 devices at the same timeWan Long Xin 140w multi-function display smart magnetic wireless chargerWan Long Xin multi-function display smart magnetic wireless charger adopts the design of polar night black, which has a sense of depth.
There is a prominent star ring design wireless charging module in the center area of the charger, and the brass-colored coil complements the lightning bolt logo in the middle, which is very delicate overall. There are 8 ports on the front, the switch button above the interface, the white "USB Magnetic Display Charger" is printed next to it, and there is a color LCD electronic display on the left side of the interface.
The charger has 4 USB-A ports that support QC fast charging, 4 USB-C ports that support PD fast charging, and 1 magnetic wireless charging pad at the top, which supports up to 140W charging, can charge 9 devices at the same time, and is compatible with PD100 65 45 30 20W level fast charging. The charger supports multi-port fast charging, and is safe and secure, with strong compatibility, and mainstream devices are not a problem. The wireless charging module uses a thickened coil with a convex magnetic attraction design for more durability. The screen supports sleep function, which is more power-saving. Related reading 1, Wan Long Xin 140w multi-function display intelligent magnetic wireless charger, an excellent choice for multi-device chargingWanlongxin socket type multi-port wireless PD fast chargerThe design idea of Wanlongxin socket type multi-port wireless PD fast charger is ingenious, so that the socket and the USB interface are located in the same plane, and the wireless charging area rises from the ground in this plane, and the rear end is extended to the wireless charging mobile phone pad, which is convenient for the mobile phone to better align with the wireless charging area, and achieve a better balance in space and function.
The charger uses a dark blue design, which is relatively calm and atmospheric as a whole, echoing the light blue of the socket and USB-A port core, which has a sense of order. The wireless charging area at the back end is similar to the "water curtain hole" design, and the mobile phone pad part is pasted with black soft material, which plays a cushioning role and can better protect the mobile phone. The charger has a total of 3 sockets, which are eye-catching in light blue, including 2 two-pin sockets and 1 two-pin and three-pin combination socket. The area above the socket is printed with the white English product name and the black 140W logo. There is 1 USB-A port and 2 USB-C ports on the left side of the socket. Thanks to its multiple outputs and high power, the charger can simultaneously charge mainstream devices such as mobile phones, tablets, and laptops, as well as wireless earphones, smart watches, printers, and other products.
Detailed parameters: Model: WLX-H11; USB-C1 output: 5V 3A 9V 3A 12V 3A 15V 3A 20V 5A, PPS: 33v-21v 5a;USB-C2 output: 5V 3A 9V 3A 12V 3A 15V 2A 20V 15a,pps:3.3v-11v 3a;USB-C3 output: 5V 3A 9V 3A 12V 3A 15V 2A 20V 15a,pps:3.3v-11v 3a;USB-A output: 5V 3A 9V 2A 12V 15a;PD20W+QC Output: 5V 4A(Max); USB-C1+C2 C3 output: 100W+30W; USB-C2+C3 output: 30W+30W; USB-C1+C2+C3 output: 65W+30W+30W; Wireless charging: 15W; Socket technical parameters: 100V 500W 240V 1000W (Max); Total power: 140W (max). Related reading 1, to solve the problem of desktop multi-device charging, Wanlongxin socket type wireless PD fast charger has summarized 11 factories this time, a total of 22 new fast charging products. Among these products are electric bicycle chargers, QI2 wireless chargers, car chargers, multi-interface desktop chargers and other types. These new fast charging products in the source factory are all excellent workmanship, quality is guaranteed, and they have passed a number of safety tests, so users can use them with confidence. After reading the new fast charging products in January 2024, people can't help but look forward to what surprises the next factories will bring in 2024, and then share them with you.