With the continuous advancement of urbanization, construction site construction has become an important part of urban construction. However, problems such as environmental pollution and urban noise caused by construction sites are also becoming more and more prominent. In order to solve these problems,China has implemented the "six hundredth" requirements of the construction site, that is, 100% enclosure around the construction site, 100% coverage of bare soil, 100% washing of vehicles entering and exiting, 100% hardening of roads at the construction site, 100% sprinkling of demolition projects, and 100% closed transportation of muck vehicles. The implementation of these requirements has effectively reduced the impact of construction site construction on the urban environment and residents' lives, and improved the civilization of urban construction.
1. 100% enclosure around the construction site
The requirement of 100% fencing around the perimeter of the construction site is to reduce the impact of construction on the surrounding environment. By setting up fences, it can effectively prevent construction materials and soil from scattering, and reduce pollution to surrounding roads, green belts and other public areas. The hard fence of the construction site should be set up continuously, and the height of the construction site fence of the main road section of the urban area shall not be less than 25m, the general road section is not less than 18m, to be sturdy, stable, neat and beautiful. The safety net is applied on the façade of the construction project to achieve fully enclosed enclosure.
2. 100% coverage of bare soil
The requirement of 100% coverage of bare soil is to reduce the pollution of air caused by bare soil dust. The sand at the construction site must be completely covered to prevent the wind from blowing up dust.
3. 100% flushing of vehicles entering and exiting
It is to reduce the pollution of urban roads by mud and dust carried by vehicles. Vehicles entering and exiting construction sites often become one of the main causes of urban road pollution because they carry mud and dust. Vehicles leaving the construction site must be cleaned to prevent dust from being carried out of the construction site.
Fourth, the construction site road is 100% hardened
It is to reduce the impact of construction on the surrounding land and roads. Generally, it is required that the place where there is frequent traffic of vehicles should be hardened, and the surface material can be concrete, asphalt, fine stone, steel plate, etc., and other bare land can be greened, covered, cured and other dust-proof measures.
5. 100% sprinkling of the demolition project
In order to reduce the pollution of the air from the dust generated during the demolition process. The construction site is set up with special personnel for sanitation and cleaning, and the dust is sprinkled twice a day in the morning and afternoon, and when encountering drought and windy weather, the number of sprinkling water and dust reduction should be increased to ensure that there is no floating soil. When excavating and backfilling earthwork, it should be supplemented by measures such as sprinkling water and dust suppression. After the completion of the project, the temporary installation, enclosure, garbage, etc. of the construction site must be cleaned up in time, and effective dust reduction measures must be taken during the cleanup.
6. 100% closed transportation of muck vehicles
In order to prevent muck vehicles from throwing muck on the street, construction earthwork, engineering muck and construction waste should be transported in closed containers at the construction site; The transportation of construction earthwork, engineering residue and construction waste should be classified by closed transport vehicles to avoid dust pollution caused by the scattering of muck.
To sum up, the implementation of the "six hundredth" requirement is one of the important environmental protection measures for construction sites. The implementation of these measures can effectively reduce the impact of construction site construction on the urban environment and residents' lives, and improve the civilization and sustainability of urban construction.
The AI management system of Sichuan Wangwang Environmental Protection Technology Co., Ltd. can monitor and shoot the slag trucks on the construction site in real time, and intelligently identify and take photos of vehicle license plate recognition, flushing status, body cleanliness, and tarpaulin coverage.
"Eight musts":
Here's what I've done for you:
1.The construction unit has the responsibility to formulate a detailed special implementation plan for civilized construction and submit it to the supervision unit of the construction unit for review.
2.Once the implementation plan is approved, the construction unit shall submit it to the local housing and urban-rural development administrative department for the record.
3.The construction site shall publicize the relevant information and pollution prevention and control measures of the construction unit, the construction unit, the supervision unit and other parties.
4.In order to more effectively monitor the construction site in real time, it is necessary to implement the installation and use of remote monitoring system.
5.The installation of spray dust reduction system, sedimentation tank, clean water tank and drainage equipment is a necessary measure for environmental protection of the construction site.
6. PM10 automatic detection device must be set up at the construction site to monitor the concentration of particulate matter in the air in real time.
7. Access control systems must be installed at the entrance and exit of the construction site to control the vehicles and personnel entering and leaving the construction site.
8. Fences (fences) must be set up and beautified to enhance the overall image of the construction site.