Start the machine
Plug in the power cord of the machine, plug in the network cable, check the power cord interface of the four fans when plugging in, check OK, turn on the power switch ("- is on, "o" is off), and then wait for the machine to start, wait for about 40 seconds, and see the blue light above the machine is always on, which means that the machine is startedPlease see the end for a schematic diagram of the appearance of the machine
Open The Wind Toolexe (you can contact rykj365 to get the group control software).
After double-clicking to open the server scanner tool, enter the password:thewindminer
Scan the server IP
Modify the start IP and end IP, click the scan button in the upper left corner to start scanning (Note: the IP of the computer and the IP of the server must be in the same LAN, otherwise the server will not be scanned).
Configure the mining pool and machine to work
Fill in the mining pool address and wallet address in turn, then right-click, select Configure Server Information, after the mining pool is successfully configured, wait for about 6 minutes, you can use the scanning tool or view the background webpage to monitor the computing power of the machine.
Find the location of the miner
Select the server you are looking for, right-> to find the location, and then left-click to confirm.
Once confirmed, the software will display "Flashing....The blue light on the back of the corresponding miner will flash.
Open the web background
Method 1: Select one or more machines, right-click -> to open the backend of the miner, and press the left button to confirm.
Method 2: Double-click the corresponding IP
After confirmation, the webpage of the corresponding IP will be opened, and the password "thewindminer" will be entered, and you can check the computing power, temperature, fan and other information in real time.
Set a static IP address
1.ip report check the " " and fill in the ip, mask, gateway, and dns
2.Press and hold the IP button on the control panel for 5 seconds, the original IP and the modified static IP will be displayed on the scanning tool, and the network format will become static Continue to configure the next machine and repeat step 2, the IP will be automatically added to 1.
The machine restarts
Select the machine you want to restart, right-click and select Restart Machine, enter the password "thewindminer" and press the confirm button.