1.Before operating the small wood pellet machine, the operator must familiarize himself with this instruction manual to fully understand the performance, structure and operation methods of the machine. Installation and commissioning are carried out in accordance with the regulations to ensure that the machine is in the best working condition. At the same time, in order to ensure the normal operation and prolong the service life of the machine, the operator also needs to use and maintain it in accordance with the regulations.
2.Before the feed raw materials enter the small wood pellet machine, the hard debris in it must be removed to avoid damage to the machine. Any residue of hard objects or impurities may cause wear or damage to the internal parts of the machine, affecting the normal operation of the machine.
3.During the production process, the operator should always be vigilant, and it is strictly forbidden to put his hand into the transmission part and pelletizing cavity of the small wood pellet machine. These areas are the heart of the machine, and any careless touch can result in serious injury. Operators should strictly follow this regulation to ensure their own safety and the safety of others.
4.In order to ensure the normal operation and production quality of the small wood pellet machine, the operator needs to constantly check the wear of the flat die and the pressure wheel. These components are a critical part of the machine and have a direct impact on production efficiency and product quality. Once it is found that there is wear or damage, it should be replaced or repaired in time to avoid affecting normal production.
5.When it is necessary to repair, adjust or inspect the small wood pellet machine, the power must be cut off first to ensure the safety of the operator. In the case of a power failure of the machine, the operator can carry out maintenance and inspection work more safely and conveniently, avoiding the occurrence of accidents such as electric shock.
6.In order to prevent accidents, the motor must be grounded. The setting of the grounding wire can effectively introduce the current to the ground and avoid the loss of personnel and property caused by leakage and other reasons. This is one of the important measures to ensure the safety of operators and the proper operation of the machine.