The use of tile back coating glue is as follows:
Clean the base surface: Before painting, wipe the back of the vitrified tile with a damp cloth to remove the oil, protectant, release agent and other substances on the back of the facing brick.
Preparation of materials and tools: Preparation includes adhesive backing, liquid components and powder components, electric mixers, brushes, rollers and other tools.
Material mixing: Mix the adhesive according to the water-cement ratio of about 1:25. Pour it into a container, stir it evenly with an electric mixer, and let it stand for about 10 minutes before construction.
Brush backing: Use a brush and roller to evenly apply a well-mixed adhesive to the back of the tile material. It is recommended to apply an even layer with the cross method to avoid missing and exposing the coat. Stay for more than 5 hours and wait for the adhesive to dry completely before proceeding to the next construction process.
Paving tiles: After evenly coating the back of the tiles with the already prepared cement mortar or tile adhesive, the tiles are laid on the wall.
Precautions: During the construction period and within one day of completion, the base and ambient temperature should be 5 35, and the materials that have just been constructed should be avoided from drenching for a day.
This product cannot be mixed with water or other substances; The mixed materials should be used up within the specified time, and they should not be mixed again after overtime.
After the construction is completed, maintenance and protection work should be done to prevent pollution, collision and damage.
The above is the basic use of ceramic tile back glue, you should follow the instructions when using, if you encounter problems, you can seek professional help.