The function of adhesive is mainly to strengthen the bond between the tile and the cement mortar to achieve a complete sealing effect. In addition, the adhesive can also improve the adhesion between the tile and the base layer, increase the service life, have good waterproof, impermeability, weather resistance, and can achieve the bonding and waterproof effect in one construction. At the same time, the adhesive also has the advantages of green environmental protection, safe and environmentally friendly, no other additives, strong safety performance, can effectively improve the adhesion, prevent the tile from cracking after paving.
Tile adhesive is a kind of adhesive material specially used for the back treatment of wet vitrified tiles, which is composed of high-quality polymer emulsion material and inorganic silicate. It can be used in combination with a variety of adhesive materials to form a ceramic tile paste system, greatly improve the adhesive force between the ceramic tile and the base layer, and is specially used in the back treatment of wet vitrified tiles, effectively improve the bonding strength between vitrified tiles and adhesive materials, and solve the common hollowing and falling off problems in wet pasting of vitrified tiles. At the same time, it is also suitable for the backside treatment of stone and other bricks with low water absorption, dense texture and smooth surface. When using tile adhesive, it is necessary to mix and stir according to the comparison of the product manual, and paint according to the painting method. After painting, it is forbidden to put it in the sun or be wet by rain, try to put it indoors against the wall, stand one by one, and it is best to clip gaskets between bricks to prevent each other from sticking to each other.
Here's how to use the adhesive backing:
Clean the base surface: Wipe the back of the vitrified tile with a damp cloth before painting to remove the oil, protectant, release agent and other substances on the back of the facing brick.
Prepare materials and tools: The tools that need to be prepared are electric mixer (for mixing adhesive and powder), brush (for applying adhesive), roller (for painting large areas), etc.
Material mixing: mix and stir the purchased tile adhesive and powder according to the comparison of the product manual, and it is recommended to use an electric mixer, otherwise it will affect the later use effect because of uneven mixing.
Brush adhesive: When painting adhesive on the back of the tile, if it is a vitrified tile with a smaller specification, you can use a row of brushes to paint, pay attention to the powder should be evenly painted, and the powder dose should be thicker, so that it will be firm. For areas with a large amount of construction, you can use a roller to paint the tiles, which is not only convenient but also fast. In order to prevent the side slurry of the brick from affecting the tiling joints, the edge of 2 3cm can be left around the brick without coating.
Construction time: It is forbidden to put it in the sun or be wet by rain after the adhesive is painted, try to put it indoors against the wall, stand one by one, and it is best to clip the gasket between the bricks to prevent each other from pasting.