3U6 slot PXIE backplane.
February** Dynamic Incentive Program
1 system slot: marked as serial number 1, located on the left, only used on PXIE motherboards, supporting 2link: x8 and x16 links.
5 PXIE Mixing Slots: Marked as Circular 2 6 for peripheral function boards.
Support Gen2, Gen1 PXIE X8, PXIE X4, PXIE X1 function cards.
The PCI bus is 33MHz, 32bit
Power connector: one ATX-24 power connector, one ATX-8 power connector.
PCI bus level selection V(Io): +5V +33V (default is +5V).
ATX power switch interface, indicator interface, fan module interface, SMB 10M clock input and output interface, see the layout diagram for details.
Each of the 5 peripheral slots provides LEDs that indicate PCIe link status.
The board is stud-fixed, which can be used in complex environments such as shock and vibration.
Operating temperature: 0 +50
Storage temperature: -20 +70
Size: 19816mm x 143.7mm x 3.2mm (length x width x thickness).
1 slot is the system slot, and 2 slot 6 is the function slot.
Warning: It is strictly forbidden to mix system slots and function slots.
VIO jumper: Select VCI bus level for VCI (IO), and the default value is +5V
CN11: ATX power switch, active low, with self-locking switch, working in AT mode.
This connector interface is used to control the power-on and power-off of ATX power modules. If the chassis provides a 2-pin power switch, the switch wiring can be connected to the CN11, and the user can control the power module to power on and off through the power switch, if the power switch is not provided, then the power module needs to be controlled by the jumper cap (the default state is disconnected).
CN1: ATX-24 core power supply socket.