Most farmers think that the use of the feed pellet machine is very simple, you only need to choose according to the type of poultry, and then operate. However, in reality the use of feed pellet machine is not as simple as it seems. The whole process from the beginning of loading to discharging, you need to pay attention to the following points:
First of all, the crushing particle size of the material is one of the important factors that need to be paid attention to during the use of the feed pellet machine. According to the different feeding properties of animals, the particle size of the feed pellet machine is also different in the process of pelletizing. Farmers often have the misconception of what to crush the material into and what to pelletize. Generally speaking, when the conventional material is crushed, it is more suitable to press the diameter of about 6 mm. If pellets with special poultry properties need to be made, the material can be crushed into pellets of less than 6 mm. And for general conventional feed, the pressing diameter should be in the range of 6 mm.
Secondly, feed pelleting moisture is also a key factor to pay attention to. Many farmers do not consider the problem of moisture when using feed pellets, resulting in soft and unformed granulation products and poor animal feeding. In fact, the finished pelleted feed is pelletized on the principle of dry in and dry out, and the requirements for moisture are very strict. It is recommended that farmers control the moisture of the material at about 13% when using the feed pellet machine, so that the pressed pellets will be fuller and the finished product will have a good effect.
Finally, uniform feeding is also a problem that is often ignored during the use of feed pellet machine. The constant speed of feeding directly affects the normal operation of the pellet machine. If the material is loaded too quickly, the machine will be overloaded and may even damage the machine. If the feeding is too slow, the inside of the pellet machine will run empty, which will affect the work efficiency. Therefore, farmers should pay attention to uniform speed feeding when using the feed pellet machine to ensure the normal operation of the pellet machine and improve its work efficiency.
To sum up, the use of feed pellet machine is not as simple as it seems. From the crushing particle size of the material, the moisture of the feed pelleting to the uniform speed of the machine, farmers need to pay attention and master the corresponding skills. Only by mastering these skills, can we better use the feed pellet machine, improve the breeding efficiency and ensure the health of the animals.