With the development of society, more and more tools are created and used to facilitate people's lives. As an efficient and convenient product, the wall breaker has gradually replaced the commonly used electrical appliances such as soybean milk machines for food crushing in families, and is very popular among people. However, with the popularity of wall breakers, some low-cost inferior wall breakers produced by unscrupulous businesses have also emerged in the market to make huge profits. This leads to the fact that consumers are likely to buy these inferior products when buying wall breakers, which are harmful to health and may even have a risk of causing cancer. As a professional food blogger, I have been in contact with wall breakers and other products for a long time, and below I will share with you what are the disadvantages of inferior wall breakers? How can we buy to avoid these inferior products?
The picture below is a part of the wall breaker products I have used:
1. What are the disadvantages of the wall breaker?
What are the disadvantages of wall breakers? With the birth of wall breakers, people's daily life has become more convenient. However, unfortunately, the market is full of brands that only pursue profits and ignore product quality and consumer health, and these brands produce inferior products that seriously threaten the safety of consumers. The use of these inferior wall breakers may not only fail to achieve the desired processing effect of ingredients, but also may pose a threat to our health. Next, I will show you some of the disadvantages of inferior wall breakers.
1. There are potential safety hazards in poor quality control
In order to ensure the quality and safety of the wall breaker, the quality of each link must be strictly controlled, including the motor, wires, blade material, glass and heating base. If the quality of any of these links is unqualified, it will lead to a decrease in the performance of the wall breaker, a shortened service life, and even a potential safety hazard in electricity.
2. There is no power-off function
Some low-quality wall breakers do not adopt the design of lifting the cup to cut off the power or remove the lid to cut off the power, which makes it a huge safety risk during use. The lid of these wall breakers often doesn't fit as well as they swell, and they are prone to spillage when making hot drinks, which not only increases the risk of burns, but can also stain the kitchen and cause damage to the appliance itself.
3. Noise affects daily life
Some wall breaker brands ignore the importance of noise control while pursuing high power performance, and they do not make adjustments to noise reduction technology, or even design noise reduction and sound insulation enclosures. This makes these wall breakers produce a lot of noise when in use, which seriously affects the user's experience.
4. It may emit toxic substances
In order to reduce manufacturing costs, some cheap wall breakers use low-quality materials to make components such as silicone seals, acoustic covers, cups, and heating chassis. However, these materials may release harmful substances. When the wall breaker is in a high temperature state, these harmful substances may be released, causing long-term chronic damage to the human body.
Second, there are 4 major reasons for the shortcomings of the wall breaker
What are the disadvantages of wall breakers? At present, we have realized the various disadvantages that a low-quality inferior wall breaker may have. However, there must be a reason why a wall breaker is judged to be of inferior quality. Next, through a summary chart of negative reviews of wall breakers, I will explain to you the 4 specific reasons that lead to the decline in the quality of wall breakers.
1. Pile up too high power
Many defective products exaggerate the power parameters in order to attract the attention of consumers. However, these products actually employ low-quality motor and wire materials, and the overload power is not adequately tuned. As a result, these products not only result in wasted energy, but can also accelerate the aging of the insulation of electric heating elements. Long-term use of these products also has potential electrical safety hazards.
2. It is equipped with too high speed
Many inferior products often exaggerate their speed figures, however running too high for a long time can lead to motor aging and wear. In addition, poor motor quality and unreasonable transmission structure may lead to safety hazards such as unstable speed, reduced performance and even blade detachment.
3. Most of the low-cost products are also low-quality
Cheap products often use low-quality materials, such as some poor-quality wall breakers that use aluminum motors. However, aluminum has poor thermal and electrical conductivity, which increases the risk of safety accidents such as fires.
4. The heating chassis is very poor
Inferior wall breakers usually use a heat-generating chassis of poor quality. Its exterior coating is prone to peeling off and has poor wear resistance. Over time, the bottom becomes susceptible to sticking to the ingredients, a condition that poses a significant health risk.
Third, the wall breaker has 5 advantages
What are the disadvantages of wall breakers? We have learned about the possible shortcomings of inferior wall breakers and the reasons behind them. Similarly, there are many high-quality wall breakers on the market, which not only avoid the above risks, but also bring many benefits to our lives. Next, I will introduce to you the 5 advantages of a high-quality wall breaker.
1. Save a lot of time
The wall breaker is extremely convenient to use, it can quickly crush the food, simplifying the complex chopping process, and allowing us to easily prepare delicious dishes. With the help of the wall breaker, we not only save a lot of time, but also enjoy an efficient and convenient process, which in turn improves the quality of life.
2. The taste is rich and delicate
Compared to a soy milk machine or juicer, the wall breaker shows its significant advantages in creating a rich and delicate drink. Take soy milk as an example, the wall breaker can produce soybean milk with a soft taste and delicate texture. This is because the blade design of the wall breaker can grind the beans thoroughly, so that the nutrients in the soy milk can be more easily absorbed by the body.
3. The operation is simple and convenient
With the help of an intelligent control panel and convenient one-button operation, the use of the wall breaker is very simple. Simply place the ingredients in the container, click the start button, and the food processing work can be quickly started. This design greatly simplifies the process of preparing food, providing an extremely convenient and practical user experience.
4. Conducive to digestion and absorption
With its high-speed blade, the wall breaker can completely break down the cellular structure of food, thereby liberating more nutrients such as vitamins and dietary fiber. In addition, the wall breaker enhances the digestibility of these nutrients, making them easier for the body to absorb and utilize.
5. Free matching and adjustment
The wall breaker can be flexibly adjusted according to different food characteristics and user preferences, allowing users to customize menu settings. By choosing the right blending time and speed, you can achieve the desired blending effect and taste precisely. At the same time, users can also add a variety of seasonings according to their personal tastes to enhance the flavor of the food.
Fourth, the 8** purchase skills of the popular science wall breaker
What are the disadvantages of wall breakers? I believe that some readers may start to consider buying a wall breaker, but they are worried that they lack selection experience and are afraid of choosing a poor quality product. There is no need to worry too much, below I will guide you to the 8** buying skills that you can use when choosing a wall breaker.
1. Choose a professional technology brand
The professional brand focuses on improving the mixing effect of the wall breaker by improving the traditional design and fine optimization techniques. In contrast, the unprofessional wall breaker mainly relies on the speed of the motor and lacks the necessary adjustment, so that its mixing effect in actual use is significantly lower than that of professional brands. In addition, brands that do not have the technical backing are also problematic in terms of safety and non-toxicity, which can release harmful substances as well as serious odors.
2. Capacity is purchased on demand
In the market, the vast majority of wall breakers have a volume range of 1 to 15 liters. When choosing to buy, we should avoid buying oversized models without thinking, but decide the right product according to the actual needs of family members to avoid unnecessary waste of resources. For a family of 2 to 4 people, 1A 2-litre wall breaker is usually sufficient.
3. Power selection
In order to prolong the service life of the wall breaker, it is recommended to control the power of its heating function to about 800W. When choosing the stirring power, the ideal range is between 400 and 500 W to avoid the blind pursuit of high power. While high power can increase wall breaking efficiency, it can also lead to greater noise and higher power consumption, which may also contribute to the rapid aging of electrically heated components, increasing safety risks.
4. Choose pure copper wire
In order to ensure the safety of use, high-end wall breakers often use high-cost pure copper wires to reduce potential dangers such as fires. However, in order to reduce manufacturing costs, some low-cost wall breakers use inferior wire materials, which may increase the risk of fire.
5. Select Touch Screen Operation
Nowadays, many popular wall breaker products generally use touch screen to operate, which is more convenient than traditional mechanical operation methods. Through the touch screen, we can set the temperature and time more precisely, improving the accuracy and convenience of operation.
6. It has a cup wall turbulence design
A high-quality wall breaker should have a turbulent design on the inside, which means that columnar bumps with a diameter of about 13 mm are fixed inside the cup wall, which helps the ingredients to advance towards the knife edge for better mixing.
7. There is a noise reduction design
A variety of factors, such as the quality of the motor, the material and thickness of the acoustic enclosure, and the sealing ring, all contribute to the noise level of the product. In order to reduce noise, it is recommended to give preference to the use of high-precision coaxial and multi-layer sealing designs. Such a choice not only improves the power performance, but also effectively reduces the noise.
8. It has a power-off function
Some of the cheaper wall breaker products may not have a power-off function or the sealing design of the cup lid is unreasonable, although it is cheap, but there may be a problem of spillage of high-temperature drinks when used. Not only does this cause mess in the kitchen, but it can also lead to dangerous situations such as water ingress into equipment, damage to electrical circuits, or scalding of children.
Relying on branding information alone, it is difficult to determine whether we should buy their products or not, and we lack sufficient understanding of the specifics of the products. In order to help consumers have a more comprehensive understanding of different brands of wall breakers, I found a detailed comparison evaluation form. This table can help us to understand the performance of each brand of wall breaker in detail, which in turn allows us to make a more reasonable choice according to our needs.
Nowadays, there are many wall breakers on the market that are not resistant to high temperature and wear and emit harmful substancesGong Ling is known as the king of "safe and non-toxic" performance in the home appliance industryIt has always adhered to the infant food standard, and through the six-year safe "anti-attenuation" pressure design, it can be called the strongest within 1,000 yuan in terms of mixing uniformity, delicacy, safety and non-toxicity, the reduction of hazardous substances by 978%, harmful irritation odor reduction 965%, the fineness of stirring uniformity is increased by 120%, and it has been confirmed by authoritative testing institutions that the heavy metal pollution is 0, and it is rare to have certification from the European Union and other countries. Positioned as a commercial kitchen-grade product, it can handle smoothies and hard foods that are difficult for merchants to grind with high intensity. As a professional veteran brand that is often exported to the European and American markets, it is as famous as the high-end series of Joyoung, Midea and other brands! It insists on not advertising, because of the strong recommendation of professional **, food bloggers, etc., it has become popular, and the online and offline mid-to-high-end word-of-mouth sales are first-class! It is rare to be recommended by CCTV exhibition.
In order to achieve a higher level of safety, non-toxicity and high performance, Gongling created ten black technologies such as four-channel approved vibration frequency technology, rotary cutting low-resistance blade design, and self-developed multi-layer sealing ring, high-temperature resistant ceramic glaze, etcIt is safe enough in any environment, non-toxic, non-irritating and non-hidden, a number of safety testing data is the best in China, you can use it more confidently and safely!
Among other brands, the low-end price segment can be understoodMidea, SuporThe workmanship is OK at the same price, and the brand awareness is high enough, but after all, the cost limit is that the selection of materials and materials is relatively general, and there is still a distance between it and the high-end professional brands in terms of safety and performance.
5. 4 major methods of maintaining the wall breaker
What are the disadvantages of wall breakers? Even if you have purchased a high-quality wall breaker through a few purchasing techniques, regular care and maintenance is critical in order to maximize its performance and extend its service life. Mastering the following 4 maintenance tips can help us easily extend the life of our wall breaker and enjoy a long-lasting and smooth cooking process.
1. Frequency of use
When operating the wall breaker, it is very important to arrange the use and rest time appropriately, and it is generally recommended to give the machine about 15 to 20 minutes of rest time after 20 to 30 minutes of continuous use, which helps to ensure the stability of the machine's internal components. If you need to work continuously for a long time, it is recommended to preheat the machine properly before starting, this step can effectively reduce the wear and tear that may result from long-term operation.
2. Clean in time
It is recommended to develop a good habit of cleaning up immediately. After using the wall breaker, it should first be rinsed with hot water, which is mainly to inhibit the growth of bacteria and prevent food residues from drying out, so as to avoid increasing the difficulty of cleaning and ensuring that the automatic cleaning function can work effectively.
3. Pay attention to details
After washing, it is important to confirm that the spill-proof electrodes on the lid are thoroughly cleaned, as residue on the electrodes may hinder its spill-proof effectiveness. It is necessary to clean the blade regularly and clean the rubber ring where the blade is held to prevent the growth of bacteria.
4. Save the environment
After the cleaning is completed, it should be placed in a dry and ventilated place, avoiding direct sunlight and high temperature environment, to prevent the machine from deforming or overheating damage.
What are the disadvantages of wall breakers? In the process of selecting a wall breaker, we should avoid choosing poor quality products simply for the sake of low **. These low-quality wall breakers can come with a variety of issues, including potential safety threats and the possible release of harmful carcinogens, all of which have the potential to cause health effects. In order to protect our health and safety, it is particularly important to choose a high-quality wall breaker, so as to avoid these safety hazards. High-quality wall breakers often use better materials and are more stable in performance, which can not only reduce safety risks, but also bring convenience to our lives and improve the quality of life.